Frigidaire CPDS389CC2 OVEN ELEMENTS NOT WORKING

SOURCE: Frigidaire ES400 oven controls

Contacts are fused.  Get a new one, cut the power and replace it.

Ron Coons

• 2651 Answers
• Posted on Dec 21, 2008

SOURCE: Frigidaire double oven has one element not working in each oven

sounds as if perhaps there has been a thermal overload(switch) tha has gone bad, refer to part number 119 on bothe the lower and upper oven for refernce , you should have continuity trough the switches.
ftp://ftp.electrolux-na.com/ProdInfo_PDF/Lassomption/5995383394.pdf

SOURCE: Heat elements in oven/broiler do not heat up

I would say to go and reset your curciut breaker first if this is a electric oven. needs 220 volts for both element to work

SOURCE: Element in top oven not heating up all the way.

Yes needs a new element.they burn out. easily.you know this because they sell them seperately.its there way to make money off of you.anytime they sell you something and the parts are readily available especially sold seperately you know its going to need to be replaced eventually..If you replace 1 replace them all to avoid furthur issues.

SOURCE: oven not heating

If the element only works partially or not getting red hot at the "Hi" setting, the problem might be with a burned out receptacle that the element plugs into. If this is the case, replace both the element and the receptacle.

You can usually tell when the element itself burns out. It might have small holes or bubbles on the coil. Replace the element, if found defective.