46" rear projection all bulbs are working but im getting double vision how come?

The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have shadows pictures or 3D pictures look alike.The tv convergence board have dead parts.The 2 STK convergence ICS and some or all it resistors on the tv convergence board are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

STK replacement time. Very common issue.
Check out http://www.tvrepairkits.com/xcart/home.php?cat=2606

coversion amp ic have died you need to call al tech to replace them parts are cheap but labor is going to get ya

you likly have a convergence problem (is that a crt projection TV?)

have you tried the blue convergence adjustment via menu

yes the convergence problem leaves a shadow of red or blue like an outline around the picture, sometimes part of the screen some times the entire screen.

what kind of tv?sounds like a convergence circuit problem.

Mike

No that is not correct
The problem you describe is a convergence issue which can be quite costly. The alignment alone is very complicated and more importantly time consuming

any repair shop can re converge the tv for you.id do some calling arond and get a few quotes to see what it would cost to have them come to you

If you do not have hand soldering skills or know how to use a multimeter, I would suggest to replace the whole assembly.
If you know how to solder you can just replace 2 ICs that are mounted on the big black heatsinks and possibly 1 or more resistors.
Click here to find the entire assembly for your TV.
Good Luck.