Question about Konica Minolta bizhub 350 All-In-One Laser Printer
Error code C3452 . how to solve this
• The Fusing Roller Sub Thermistor does not
detect the required temperature within 30 sec.
after a warm-up cycle has begun; therefore, the
copier does not complete the warm-up cycle.
• The temperature of the Fusing Rollers does not
reach the required level even after the set period
of time has elapsed during a warm-up cycle.
1
Check that the H1[ fuser lamp] comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
2
Check that the H2 comes on when the Main Power
Switch is set to ON, and correct or replace as necessary.
- -
3
Check the installation of the TH1 and the TH2, and
correct or clean as necessary.
- -
4
Check the operation of the TH1.
Remove CN80 (4P), and then check that the resistance
across CN80-2 and -3 on the Thermistor is
infinity.
- -
5
Check the operation of the TH2.
Remove CN81 (4P), and then check that the resistance
across CN81-2 and -3 on the Thermistor is
infinity.
- -
6
Check the continuity of the H1.
Correct or replace as necessary.
- -
7
Check the continuity of the H2.
Correct or replace as necessary.
- -
8 Change PU1 - -
9 Change PWB-A
Posted on Nov 19, 2007
May be errononous. try resetting the code in "trouble" in the service menu
Posted on Nov 19, 2007
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
Aug 17, 2014 | Konica Minolta Bizhub C300 All-In-One...
Jun 04, 2014 | Konica Minolta bizhub 200 Printer
Apr 16, 2014 | Konica Minolta Office Equipment & Supplies
Apr 16, 2014 | Konica Minolta Office Equipment & Supplies
Jan 29, 2014 | Konica Minolta Bizhub C300 All-In-One...
Sep 14, 2013 | Konica Minolta bizhub 350 All-In-One Laser...
Jul 23, 2013 | Minolta bizhub 200 All-In-One Printer
Sir/mam check the right side door that you open to remove the image unit check that the two latches that hold the door close are OK especially the rear one. Close up. To reset. On the right side of the machine just below the scanner section (The part with the big glass) is a cover next to where you connect the Ethernet cable. Remove the cover with the machine on use a small screw driver and gentle depress the small black switch the machine is going to go thru some screens when you see the screen with the copiers on it to the left on the screen in the middle you will see a "." when that is displayed press 3. Code will come back but now press the Utility/counter button should see button that say maintenance mode press that see trouble reset press that machine again will go thru warm up procedure will see the "." DO Nothing! Should go to "Ready to Copy" if the code comes back have a technician look at it DO NOT CONTINUE TO RESET the code is for the Hot Part called the FUSER. Can catch on fire! That will ruin a perfectly good day!!!!
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Jan 23, 2012 | Minolta bizhub 200 Copier
Dec 06, 2011 | Konica Minolta bizhub C250 All-In-One...
Nov 21, 2010 | Konica Minolta Office Equipment & Supplies
1,785 people viewed this question
Usually answered in minutes!
Konica minolta error codes PRT/IR ERROR P-5
What does the hard drive look like in a Konica Minolta bizhub Imigitics 2520F
konica minolta error code c-1256
i have ITEC B-350 KONICA MINOLTA
how i can fix error c-5101 ib bizhub 600
how i can fix error c-5101 in konica bizhub 600
211 service manual error code 32
53-1
I get error code C-004F when i start my Bizhub C350. How can I solve this Problem?
×