How do I reset absorber counter on my canon mx882

Canon has changed all of the new printers and eliminated the built in reset ability of the printer. You must have specific software to access the Service Mode and from there you can reset the waste ink counter. Contact me at [email protected] for detail

Double check that the error isn't 6C10. I also thought I had an 8C10 error also and that's how I found your unanswered question! But I couldn't find any other internet reference to 8C10 but I did find a YouTube fix for a 6C10 error message. So I got my reading glasses and looked again. Sure enough it was a 6C10 error! I followed the instructions for the 6C10 error fix (resetting Ink Absorber Reset) and my printer is now functioning. Bonus note: My printer is a MP620 and the reset was for a MP550. Same error number though! and also same solution. By now your printer has probably crossed that printer rainbow bridge... but hopefully someone else will need your help? With my reset, I am going to run my $$$ ink cartridges out instead of maintenancing the absorber and then toss mine as well!

6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

Hello and Welcome to FixYa!

Error 6c10 is ink absorber problem.You need to reset Printer Canon ink absorber. For this Follow the steps given below

• Start with printer off
• Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
• While holding the Power button, release the Resume Button.
• Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
• Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
• Turn off the printer and turn on again

Error will be removed
If the problem exist then then go to Canon authorized service facility for repair. You can also get support by Canon by phone, at 1-800-OK-CANON (1-800-652-2666)

I hope this solution helps you
Thank you for using FixYa!

my canno mp640 will not print in black, have replaced the 521/520 carterages new also a new printhead, and stiil it will not print,yet it prints colors ok. can you help please
DD.

Hello and Welcome to FixYa!

Error 6c10 is ink absorber problem.You need to reset Printer Canon ink absorber. For this Follow the steps given below

• Start with printer off
• Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
• While holding the Power button, release the Resume Button.
• Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
• Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
• Turn off the printer and turn on again

Error will be removed
If the problem exist then then go to Canon authorized service facility for repair. You can also get support by Canon by phone, at 1-800-OK-CANON (1-800-652-2666)

I hope this solution helps you.

For further assistance, I am here to help

Concerned:

Angel Bird

to fix this you must'

Start with printer off

1. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
2. While holding the Power button, release the Resume Button.
3. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
4. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
5. Turn off the printer and turn on again

Hello and Welcome to FixYa

Error 6c10 is ink absorber problem.You need to reset Printer Canon ink absorber. Follow the steps given below

• Start with printer off
• Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
• While holding the Power button, release the Resume Button.
• Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
• Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
• Turn off the printer and turn on again

Error will be removed
If the problem exist then then go to Canon authorized service facility for repair. You can also get support by Canon by phone, at 1-800-OK-CANON (1-800-652-2666)

Anymore help, I am here to help

Concerned:

Uxair Shah

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

http://www.fixya.com/support/t5998845-error_code_6c10_mean

Hope this helps.

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

http://www.fixya.com/support/t5998845-error_code_6c10_mean
Hope this helps.