Windows XP doesn't recognize me as computer administrator

Solution 1
Requires some tech skills:

To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Solution 2 Reinstall Windows Xp

Assuming it is windows XP here are the steps to fix that error:
To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line:md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

My YouTube Channel
Click Here Live Tech Support

Easy Way --- Note that this doesn't always work.
When you are booting your system, press the F8 key during the start of the bootup sequence, meaning after it does the Power On Self Test.

Once you press the F8 key, you will be taken to a Menu. Select "Boot Using Last Known Good Configuration".

It will now attempt to load Windows XP using a past set of configuration files.

If that doesn't work, there is the next step....the hard way.

Hard Way
Boot your system with the Windows XP Install CD, let the system boot into the Setup. Once in the Setup, choose to run the Recovery Console.

You will now be presented with a screen similar to good old DOS.

First, we will recover the System Hive.

Now, type in the following commands with pressing Enter after each line.

md tmp
copy C:\windows\system32\config\system C:\windows\tmp\system.bak
delete C:\windows\system32\config\system
copy C:\windows\repair\system C:\windows\system32\config\system

Be very careful when you are typing in these commands, one wrong move, and you have, broken Windows XP.

Also, change the C in the commands to whatever your Windows XP drive letter is.

Attempt to boot the system, if it doesn't boot, get back into the Recovery Console and do the following commands.

md tmp
copy C:\windows\system32\config\software C:\windows\tmp\software.bak
delete C:\windows\system32\config\software
copy C:\windows\repair\software C:\windows\system32\config\software

Then use Recovery Console:
To boot from the Windows XP CD, insert it into the CD-ROMdrive on the problem system and press [Ctrl][Alt][Delete] to reboot thecomputer. Once the system begins booting from the CD, simply follow the promptsthat will allow the loading of the basic files needed to run Setup. When yousee the Welcome To Setup screen, press R to start the Recovery Console.

You'll then see a Recovery Console menu. It displays the foldercontaining the operating system's files and prompts you to choose the operatingsystem you want to log on to. Just press the menu number on the keyboard, andyou'll be prompted to enter the Administrator's password. You'll then findyourself at the main Recovery Console prompt.

After restarting windows use a system utility software like RegInOut.

Glad to hear you're up and running again.

Hi
try to restore system or repair the windows

you can try so copy the folder from another good running windows

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change C:\Windows to the appropriate windows_folder if it is a different location.

If you need more help come back.Post / thumbs / testimonial are welcome!

kindly follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change it is a different location.

If you have access to another computer, to save time, you can copy the text in step five, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console: batch regcopy1.txtWith the batch command in Recovery Console, you can process all the commands in a text file sequentially. When you use the batch command, you do not have to manually type as many commands. Part two loadTOCNode(3, 'moreinformation'); To complete the procedure described in this section, you must be logged on as an administrator, or an administrative user (a user who has an account in the Administrators group). If you are using Windows XP Home Edition, you can log on as an administrative user. If you log on as an administrator, you must first start Windows XP Home Edition in Safe mode. To start the Windows XP Home Edition computer in Safe mode, follow these steps.

1. Click Start, click Shut Down (or click Turn Off Computer), click Restart, and then click OK (or click Restart).
2. Press the F8 key.
   
   On a computer that is configured to start to multiple operating systems, you can press F8 when you see the Startup menu.
3. Use the arrow keys to select the appropriate Safe mode option, and then press ENTER.
4. If you have a dual-boot or multiple-boot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

In part two, you copy the registry files from their backed up location by using System Restore. This folder is not available in Recovery Console. Before you start this procedure, you must change several settings to make the folder visible:

1. Start Windows Explorer.
2. On the Tools menu, click Folder options.
3. Click the View tab.
4. Under Hidden files and folders, click to select Show hidden files and folders, and then click to clear the Hide protected operating system files (Recommended) check box.
5. Click Yes when the dialog box that confirms that you want to display these files appears.
6. Double-click the drive where you installed Windows XP to display a list of the folders. If is important to click the correct drive.
7. Open the System Volume Information folder. This folder is unavailable and appears dimmed because it is set as a super-hidden folder.
8. Open a folder that was not created at the current time. You may have to click Details on the View menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. These are restore points.
9. Open one of these folders to locate a Snapshot subfolder. The following path is an example of a folder path to the Snapshot folder: C:\System Volume Information\_restore{D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}\RP1\Snapshot
10. From the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_.DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
11. Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_.DEFAULT to DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the backed up registry files from System Restore. .

Part Three loadTOCNode(3, 'moreinformation'); In part three, you delete the existing registry files, and then copy the System Restore Registry files to the C:\Windows\System32\Config folder:

1. Start Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line: del c:\windows\system32\config\sam
   
   del c:\windows\system32\config\security
   
   del c:\windows\system32\config\software
   
   del c:\windows\system32\config\default
   
   del c:\windows\system32\config\system
   
   copy c:\windows\tmp\software c:\windows\system32\config\software
   
   copy c:\windows\tmp\system c:\windows\system32\config\system
   
   copy c:\windows\tmp\sam c:\windows\system32\config\sam
   
   copy c:\windows\tmp\security c:\windows\system32\config\security
   
   copy c:\windows\tmp\default c:\windows\system32\config\default Note Some of these command lines may be wrapped for readability.
3. Type exit to quit Recovery Console. Your computer restarts.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder.

If you have access to another computer, to save time, you can copy the text in step two, and then create a text file called "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:
batch regcopy2.txt Part Four Click Start, and click All Programs. Click Accessories, click System Tools. Click System Restore, click Restore to a previous RestorePoint.

Sounds like you may have bad RAM. Try removing all of the RAM modules on your motherboard and put only one in the first slot. Start the computer and see if it works.