How do I get faxes and copies to print from tray 2?

Go to the link and download and install the FULL feature printer software from HP for your operating system: http://123.hp.com/us/en/

put in your printer model, Operating System and download & install the FULL feature software.

Once you have downloaded and installed the FULL feature software, you will be able to print and scan.

try to change a new the printerhead or check if you still have an ink in your office jet

1 Click the Set-up button 2 Go to Fax Settings/Fax Set-Up/Basic Fax Set-up (Whatever you get to see first) 3 On Fax Header, press okay 4 And then just enter your name, hit ok 5 And then it will be asking you to enter your Fax NUMBER 6 HIT OKAY again.
I hope this helped.

Put the documents you want to fax in the tray.Dial the fax number.After that the printer will scan the docs first and the send via memory.

If you need more help come back.Post / thumbs / testimonial are welcome!

You may not have configured the HP for two trays.
Open Printers and Faxes - right click on the HP printer and click on Properties - click Device Settings tab - Installable Options, in Number of Input Trays enter "2" then click OK.
When you print you will be able to select the tray1 or 2 to print.

When the HP Office jet series all-in-one front panel screen displays Memory Full, the HP Office jet all-in-one is not able to send, receive or forward faxes. Copying will also not work. WORKAROUND: Though the memory buffer should clear itself automatically after proceeding with the next task, like receiving a fax or starting a copy job, these suggestions below may help you clearing the memory buffer by:

• Add paper to the HP Officejet series paper tray
• Clear a possible print jam and proceed printing the fax.
• Reduce the copying or faxing resolution via the front panel's menu.
• Use the HP Manager to send a (group) fax or making a copy. More memory is available this way, as the HP Manager utilizes the PC memory. When sending a group fax, the HP Officejet all-in-one's memory is filled to capacity. To copy in color is only possible from the HP Officejet Manager.
• Press START to clear the message. If this message persists, unplug the power cord, and after at least 15 seconds plug the power cord in.

CAUSE: The HP Officejet series memory may be full due to: Copying on Photo quality or sending a group dial, which will use an extensive part of the internal memory's capacity. No paper in the paper supply tray, while receiving a fax. This may result that the data remains in the buffer. Print jam while receiving a fax or copying. The data is still stored in the buffer. System error displayed on the HP Officejet display window. SUMMARY: The HP Officejet series will not fax or copy without sufficient memory to store the data of the page in the buffer before printing the receiving fax or the copy.

I think you need to add some paper to it so that the printer will easily pick them,,,,or arrange the paper onto the tray..

YOU WILL NEED DRIVERS FOR THAT DEVICE.

WWW.HP.COM/MAC
HP OFFICEJET PRO DRIVERS MAC 7780
OR
HP OFFICEJET PRO 7780 MAC DRIVERS
OR
HP OFFICEJET PRO 7780 DRIVERS

AND

CONTROL PANAL GO INTO NETWORKING AND SHARING FOLDER

PRINTING SHARING, OR PROPERTIES SETTING NEED TO BE CHANGED

DOES THE SYSTEM SUPPORT WIFI

MAKE SURE THAT THE ANTIVURAS PROGRAM AND FIREWALL IS HAS STOPPED YOU SCANNER TO COMMUNICATE WITH THE MACHINE, JUST SOME FINE TUNNING IN THE FIRE WALL MAYBE ALL IT IS.

ROD

hi there,

initially you have to check and correct this few settings.

To receive a fax manually

1. Make sure the device is turned on and you have paper loaded in the main tray.

2. Remove any originals from the document feeder tray.

3. Set the Rings to Answer setting to a high number to allow you to answer the
incoming call before the device answers. Or, turn off the Auto Answer setting so
that the device does not automatically answer incoming calls.

4. If you are currently on the phone with the sender, instruct the sender to press Start on their fax machine.

5. When you hear fax tones from a sending fax machine, do the following:


a. Press the left arrow or the right arrow to select Fax B&W or Color fax.
b. Press Start.
c. After the device begins to receive the fax, you can hang up the phone or remain on the line. The phone line is silent during fax transmission.

Hope this initial info helps you.

micromaster-

press setup on printer select preferences and select default tray as 2 and try making copy and also check while receiving fax and also follow this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01096354&cc=us&lc=en&dlc=en&product=1119598&dlc=en&lang=en