Adding stored phone numbers to the other 2 handsets

You did not give a model number, but..
This is normal for most of this type of phones. You can transfer the call to other phone but 2 phones cannot be on call at once. To transfer, look on the handset for a Transfer button.

If you want to use 2 phones at once, I suggest putting in a wired phone in one location.


You can download a manual from here.. This will help you if the tranfer function is not clear. http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/

Hi, you need to put that extension into the ring group / groups. to do this, with the handset down dial;
TRANSFER 200
Password 1234
1 to enable
SPEAKER key
601.
press the volume key to get to the group(s) you want to be added to, this is the number in the brackets. once you have that press the 3rd soft key under the phone screen, use the volume key again to find 'members' then use your volume key when you get an empty slot - reads NONE, type in your extension number, press TRANSFER to store and exit programming. the video off http://www.abbeytelecom.com will help explain,

To program one of the three emergency buttons:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) press one of the three emergency buttons
6) replace the handset in the cradle
To use; lift handset and press an emergency button, the phone dials the number stored for that button

To program one of the ten memory locations:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) dial a one digit number(0-9) to store the number in that location
6) replace the handset in the cradle
To use: lift the handset, press the MEMORY button, dial the memory location digit(0-9), the phone dials the number stored in that memory location


Here is a link to download the manual.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

I have an old Unisonic 9725, and the programming method for that phone may work for yours.
1. take handset 'off hook'
2. press: store
3. enter phone no.
4. press store
5. press memory button 1, 2, or 3...or 0-9
6. put handset back 'on-hook'

to use: take handset off hook, and press the memory number that applies.

Before you store a telephone number in memory, make sure the dialing mode is
correctly set for the type of service you have. The default dialing mode is tone
(touch-tone), so if you have pulse (rotary) service, you must first change the dialing
mode. See “To Set the Dial Mode.” The following buttons can be stored into any
memory location: 0-9.
STORING FREQUENTLY CALLED NUMBERS
1. Pick up the handset.
2.Press the store button.
3. Push the desired memory location button.
4. Press the store button.
5.Use the handset number keys to enter the telephone number (up to 16-digits)
and press the store button.
6.Hang up the handset.
NOTE: If you make a mistake, use the delete button to delete wrong digits.
CHANGING A STORED NUMBER
Repeat the storage sequence above. The new number replaces the old number at
the memory location.
ERASING A STORED NUMBER
1. Pick up the handset.
2.Press the store button.
3.Press the memory location (0-9) to be erased.
4.Press delete for three seconds until the number in the display is erased.
5.Hang up the handset.
DIALING FREQUENTLY CALLED NUMBERS
1. Pick up the handset and press the mem button.
2. Press 0-9 for the memory location. The number dials automatically.
OR
1. Pick up the handset and press the dial button.
2. Press the review button for the desired memory location.
3. Press the dial button to dial the number.
OR
1. Press dial button while the handset is still in the cradle.
2. Press the review button for the desired memory location, lift the handset and the
number dials automatically.

Download User Manual

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thank you.

Were they enterd on handset number two? If so, they must bew transfered to handset number one.

enter the PB on #2

press MENU/SELECT

choose to COPY ALL

scroll to the handset you want to copy the numbers TO

Here is the solution:

1) Pick up the handset
2) Press the "Store" button
3) Dial the number that you want to store
4) Press the "Store" button
5) Press one of the Memory button such as M1, M2, etc.

6) hang up the phone (put the handset back to the base)

When you're ready to dial the number, just pick up the handset and press one of the Memory button that you just use to store your desired number.

Best of luck,
KP

Program Thomson Consumer Electronics (GE?) 2-9316A Speaker Phone (what we found works)
To program:
1. press speaker or lift handset.
2. press STORE
3. dial the number to be stored
4. press MEMORY DIAL
5. press location (0-9 on keypad or 1 of the 3 emergency quick dial)
6. press speaker or hangup.
To dial emergency numbers:
1. press speaker or lift handset.
2. press any of 3 emergency quick dial
To dial stored numbers:
1. press speaker or lift handset.
2. press MEMORY DIAL
3. press location (0-9 on keypad)
Does anyone know how to add PAUSE in a stored dial string?

MEMORY

Store as many as 12 numbers in memory for easy dialing. Three can be stored in the Emergency Quick Dial locations, and nine additional numbers can be stored in the numbered keys (1-9).

STORING A NUMBER IN MEMORY

1. Press SPEAKER (or pick up the handset).
2. Press STORE.
3. Dial the number to be stored (up to 16 digits).
4. Press STORE button.
5. Press a Memory Location (1-9 on the keypad), or an EMERGENCY QUICK DIAL button.
6. Press SPEAKER (or hang up the handset). 7. Record the phone number on the memory directory (located under the plastic cover).

ADDING A PAUSE TO THE DIALING SEQUENCE

Use the REDIAL button to insert a delay in the dialing sequence when storing a number, for example, when you need to dial 9 to get an outside line. Press REDIAL at the point in the dialing sequence in which a pause is required.

CHANGING A STORED NUMBER

Change a stored number by replacing it with a different number.

DIALING A NUMBER FROM MEMORY

You can dial numbers from memory when using the handset or speakerphone. When you get a dial tone, press the MEMORY DIAL button followed by the memory location (1-9) for the number you want to dial.

Emergency/quick dial numbers: Pick up handset, push store, enter the phone number (it will not call the number), push store again, Push A,B or C. hand up handset. Frequently called numbers, pick up the handset, push store, enter the phone number, push store again, push key pad 1, or 2, etc. for memory location. Hang up handset. How to change a stored number. just repeat the sequence. How to clear a stored number, repeat the storage skip step 3 (do not enter the phone number). How to correct an error while storing, just hang up and repeat.