The hand wheel on my Singer Confidence Quilter 7469 won't turn. At first it made a clunking noise and now won't turn or sew. Checked for thread & lint but still cannot get it to turn. Plea

Motor Belt, Singer #087263 below is a link to singer support and you can apply for instutions
press the helpful button

7469Q CONFIDENCE QUILTER

Contact your local Singer Dealer, Or look on Singer Web Site

This happen to me I left the bobbin in lock position. when I fill up my bobbin on the top I push toward the right to lock in place. and when your finished.you forgot to push it back to un lock it. And that will cause also the wheel not to move..

Mine was doing the same thing. I called Singer and if the reverse stitch is working fine, it's a problem with the foot pedal. They sent me a new one under warranty. If the reverse stitch is having issues as well, then it could be a problem in the machine itself.

do this

If the iron heats but steams improperly, inspect the soleplate and clean the vents (see below) and flush sediment out of the steam chamber (see below).
If the iron produces too much or too little heat, test the electrical cord . Also test and, if needed, adjust calibration of the thermostat
If the iron does not spray properly, inspect and clean the nozzle (see below).
If the iron leaks or spits, clean the steam vents, nozzle, and tank.
If the iron sticks to fabric, clean or repair the soleplate. If the iron stains fabric, clean the soleplate, clean the tank with a commercial cleaner, and use distilled or filtered water.

test the power cord for open or faulty 2) loose wires from the power cord to the foot pedal
3) foot pedal switch open or faulty, test the wires from loose or breake wires and repair
3) motor need repair , brush, condensator, centrifugal switch. etc
God bless you