Ned a presser foot holder and a regular presser foot
Here are the parts you need:
Brother Sewing Machine Presser Feet & Shanks
Thing that holds presser foot spring nut
First thing you'll need to do is switch the presser foot.
Your machine should have come with a specific button hole foot.
(might have an R on the bottom)
To snap off:
Raise the needle and presser foot.
Press the red button on the back of the foot holder
and the foot will drop.
To snap on:
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
Select which buttonhole style you would like to stitch.
This can be done by selecting a mode (buttonholes are 06-08)
and then adjusting to the desired length and width.
After you do this, lower the presser foot and hold the foot pedal down.
The machine will automatically sew the buttonhole and stop when it is finished
All you'll need to do is just cut the thread after.
Hope you found this information helpful.
762 views
Usually answered in minutes!
pfaff 7550 presser foot adjustment
is my presser foot too heavy
I insert the presser foot holder as described in the manual and tighten. I sew for a little and then the holder just drops from the rod. Secodly the automatic needle threader does not thread the needle.
presser foot not working
×