My remotes suddenly stopped working and the wall button works ok

The motor/control unit may have gotten reset. It needs to relearn the codes transmitted by the remotes.

MIne has a "learn" button on the control unit. Press and hold, then press the button on the remote. Lights will flash indicating it has received and stored the code. Release button.

Check to see if the remote works now. If so, all three should be working. If not, dig up your manuals.

Did you change the batteries?

If the remotes have been working and have suddenly stopped, then it is likely the remote radio receiver is faulty. There are plenty of cheap universal garage door remote control kits on the market and the are very simple to fit, just connect to the garage door push button universal garage door remote control

Press and hold for 3 seconds the lock button on the wall control. The light should stop blinking and your remotes should now work.

Sounds like your logic board has quit working.

Press and hold for 3 seconds the button on the wall control with the lock icon. There you go.

Sounds like the reciever for you wireless devices is not working?

Check the wall control. If the small green light is blinking press and hold the button with the lock icon for 3 seconds.

You probably have the lock enguaged on the opener. On the wall control, there is a button labeled "lock". Press and hold for 3 seconds and then release. the light on the wall button should be solid now. Your remotes should work. If the light is solid and the remotes still do not work, press the learn button on the back of the opener motor and then press the button on the remote. The light on the motor will blink once. Repeat on the other two remotes.

someone hit vacation or lock on wall control?