Zanussi FJS1225W Front Load Washer Logo
Amanda Wingrave Posted on May 19, 2007

Zanussi FX1465W aquacycle, beeps 5 times and end light flashes

My Zanussi FX1465W has stopped working. When it is turned on after a while it starts to beep 5 consecutive times and the end light flashes. The manual only mentions 1, 2 and 4 beeps not 5...Please can someone advise on the problem?

  • 5 more comments 
  • Amanda Wingrave Jun 17, 2007

    The engineer came out and said the motor had gone. I also contacted Zanussi customer service and they confirmed that the motor has gone and would be cheaper to buy a new one!!

    I have done now and NOT a Zanussi as mine was only 2 years old, so didnt last very long for a washing machine!

  • r18628 Apr 21, 2008

    Same issue. System beeps five times and doesn't spin at all. Water seems to drain no problems. Machine is only just turned 4 years old.

  • charlie73 Sep 07, 2008

    my washer flasehes twice on my 40 degree cycle. have cleand the filter but still no joy. Can anyone help the manuel suggests beeping but not flashing while washing.

  • Anonymous Mar 17, 2014

    Not spinning , opened the top and found the belt off and fallen at the bottom. please advise me how should i put it back

  • Anonymous Mar 24, 2014

    start then stops beeps and green light flashes 7 time

  • Anonymous Mar 27, 2014

    Zj1217 won't start. Led lights flash (2 4 and 8)

  • Anonymous Mar 30, 2014

    The door clicks and the end light beeps 4 times, which I gather indicates a problem with the door lock. I don't know where that is, or how to access it.

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jun 16, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jun 13, 2007
Answers
1
Questions
1
Helped
3340
Points
0

I have the same trouble with my washing machine did you find a solution i have been told the PCB or motor drive system

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Zanussi 1200 aquacycle fx1265w

Either it not getting water, or the motor brushes are worn out.

Sam
0helpful
1answer

Washing machine humming but nothing else :(

if you watch carefully, the end light flashes and then stops, and then flashes again... how many times flashes?
0helpful
1answer

Hi Machine will no start..At first all lights flashing and now just start and reset button flashing.. Start button flashes 3 times reset button flashes 5 times. Can you help. Cheers

I have a zanussi zwf1432w aquacycle.

Hi Machine will no start.Starts to fill,Stops and goes straight to drain.There is no blockages in filter or pipes,Have checked all,Even pipe from drum to filter.

At first all lights flashing and now just start and reset button flashing..

Start button flashes 3 times
reset button flashes 5 times.

Can you help.
Cheers
0helpful
1answer
0helpful
1answer
1helpful
1answer

Broken Zanussi tce 7127 w dryer

the dryer is telling you a trouble code like in a car when something is malfunctioning with it, try to call your manufacturer and ask them to tell you what that code means.
Nov 06, 2009 • Dryers
2helpful
2answers

Zanussi FS 1355 w Drum not turning

DEFF BRUSHES.JUST HAVE SAME PROBLEM MYSELF NOW AND TOUCHED BRUSH HOLDER SLIGHTLY AND RESTARTED..
0helpful
1answer

Hi i have a zanussi fx1465w presently giving 5 bleeps &flashes of the indicator light any idear what this cauld be as the washer is not functioning after filling

5 flashes is motor down to earth usually resulting in replacing the motor. Sometimes the motor may have got damp you can try to dry it out if it looks damp this may work but its usually the motor itself.
0helpful
1answer

Zanussi electrolux aquacycle 1400 xc 6 fx1465 w

i have a problem with my zanussi aquacycle 1400 xtra capacity. some times it works ans some times not like there is a problem with the power the alternater? should i change this part? please help as my wife is driving me crazy.
0helpful
1answer

Zanussi electrolux aquacycle 1400 xc 6 fx1465 w

assuming you had correct value fuse, fuse blowing may have been caused by a machine fault.after power outage, cycle should resume.
Not finding what you are looking for?

3,350 views

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...