Printing from my macbook pro using my Canon Image Class D320 I recently purchased a MacBook Pro and I'd like to print using my Image Class D320. I see no support and no drivers out there. Any ideas. A

you need to set the ip on the printer to within the ip range of your wireless router. Then you need to install a mac book pro driver for the canon i960 on the Mac Pro. THe mac pro should then automatically detect the printer and hook up to it

download the Pixma Printing Solution App for OSX & iOS

PIXMA Printing Solutions PIXMA MAXIFY Printing Solutions

You have a bad driver. Reinstall your screen driver or clear your P ram by holding the letters P and R and the control button when you boot your laptop. Hold them until it chimes and reboots.

Try printing using the print button within hotmail
It's on top middle of the hotmail webpage

Hi
Did you install the Canon Software onto the Macbook?
Try this
Open your applications folder and locate an app called "Image Capture"
Open it. It may say that there is no image capture device connected, but it gives you a browse button. Click on it and wait a moment (make sure that the printer is powered up first of course). With a bit of luck you should suddenly see your printer listed. Give it a click and do OK or whatever it asks and then the scanning softare should start up. It will give you the c hoice of what to do with the scan in the 'scan to' box.
Post back if it works. (it generally does.)

Hi,
The flashing green light normally means that the computer is sending information to the printer.
If the printer is receiving information, but is not printing, the cartridges may need replacing, or the printer may be faulty.
Do you have a friend with a printer? Can you try printing to their printer just to check your computer is ok?

Why not try using a card reader to download your pics?

According to this Canon site, there are no Mac OS drivers available for the ImageClass D320.....only Windows Platform.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=335&modelid=9036

Hello! The MacBook Pro you have mentioned can only support 4GB's total. 2GB's in the first slot, and 2GB's on the second slot.

What you may have seen by accident was that you can purchase either a 4GB kit, or a 2GB kit. Meaning a 4GB kit with 2 2GB sticks, or a 2GB kit with 2 1GB sticks.

Your best bet is to go with a 2GB stick in each slot to max out your MacBook Pro. 2GB's is the largest each slot can read.

For more information, check out the website below which has very detailed information on memory for various systems.

MacBook Pro Memory Information

The easiest way is to download the software from the Canon website. The install file will allow you to select the printer, and you won't have the issue of not finding your printer driver in the drop down list where it asks you to select one.
1. Download Software from Canon website: www.usa.canon.com/download
2. Plug printer in with USB cable.
3. Run downloaded software.