At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This error normally comes when your Canon camera lens gets stuck in the barrel itself. There are some steps which can be followed to resolve this problem which as follows,
STEP 1: Switch on the camera while you hold the shutter button and connect it to the AC adapter or to the USB cable at the same time.
STEP 2: Now by default the lens should get properly aligned if not try to twist them slightly by holding down the camera lens with soft hands.
STEP 3: Just push and pull the lens slightly as it extends automatically.
STEP 4: Now when the lens is in the hard surface power on your camera.
STEP 5: Try to hit the camera softly beside the lens which might solve the issue.
You can try to format the memory card completely and then reinsert to your camera which might be the issue at times.
If you are facing error E32 it means lens becomes stuck in the barrel. There are some solutions you can try to fix but the
probability is that you will have to get it fixed by a professional. First connecting your AC adapter or USB cable.Try holding the
shutter button while switching on the camera. Look at the lens and if some of the lens circles is misaligned or not concentric then
try wiggling it. Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand. If your camera is still under warranty then best solution is to take it from where you purchased before trying any of these steps.
I hope this solution helps you. Thank you for using FixYa
If you're having E32 errors, it means that your lens is stuck in the barrel. It's not an uncommon error, but the best resolution I can suggest is to bring it to a professional as a last case scenario, but here are some tips:
1. Try holding the
shutter button while switching on the camera 2. Try connecting it to your USB adaptor, usually it pushes the lens in and out. 3. Look at the lens and if some of the lens circles is misaligned or not concentric then
try wiggling it, turn your camera off and on.
E32 error means lens has become stuck in the barrel. There are some solutions you can try to fix but the
probability is that you will have to get it fixed by a professional
First connecting your AC adapter or USB cable.
Try holding the
shutter button while switching on the camera
Look at the lens and if some of the lens circles is misaligned or not concentric then
try wiggling it (while holding camera lens down)
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again. Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand. Other than that take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera. If it is still under warranty best solution is to take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
I hope this solution will helpful for you. Thanks and Keep Visiting FixYa
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
Use
these at own risk as it may further damage the camera.
Firstly ,
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.
Other than that , I would take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
Hope
the advise is useful. Please do not hesitate to let me know if you need any further assistance.
I have purchased recently canon ixus 130, the camera automatically shuts down after some 30 sec& shows a messege 'camera error,restart camera will autometically shut down error E32.'
×