Yamaha rx-v367 stuck on silent cinema.no sound when head phones unpluged.

Duane Wong

• 6826 Answers
• Posted on Jan 02, 2011

SOURCE: i can't get a sound from my yamaha rx-v367. my tv

Last update: 05/02/2008
Connect the audio outputs jacks from the TV to any available audio input terminals on the Yamaha receiver, other than the phono input. You can use any analog audio Left (White) and Right (Red) inputs on your receiver such as the DTV/CBL, SAT or VCR input. There are no special settings needed on the receiver, other than selecting the correct input. There may be some settings that will need to be changed on the TV. Consult the TV ownersEmanual for setting up the TV to output audio to an external source. If youre TV has a digital output (Optical or Coaxial) it can also be run to one of the digital inputs on the Yamaha receiver, such as DTV/CBL or DVD. There may be some settings that will need to be changed on your TV. As always, consult the TV ownersEmanual for setting up the TV to output digital audio to an external source.

NOTE: When the source of the audio signal is coming from an HDMI device connected to the TV, the TV may not output in 5.1 surround sound.

SOURCE: i need to buy a yamaha remote control for rx-v367

http://remotes.com/remotes/servlet/rs?a=gmi&uuid=A12953942038611&smodel=RXV367&brand_pn=YAMAHA_RXV367

SOURCE: i just bought a yamaha

sell the bose sub, buy a nicer yamaha sub, enjoy the 200 bucks you have even after you buy a new speaker.

Joe Negus

• 652 Answers
• Posted on Feb 14, 2011

SOURCE: User Guide for Yamaha RX-V367

you can go here and join the easypass... http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v367_black__u/?mode=model

SOURCE: Yamaha receiver mdl RX-V367. What

Here are the codes for your Yamaha RX-V367: 733, 663, 732,747, 730, 731, 745, 848, 847, 657, 786, 684, 849, 655, 823, 841, 646, 650, and651.

Step 1:
Press and hold the AUX button until all mode button back lights come on, thenrelease.

Step 2:
Press 2, and then enter the device code corresponding to the equipment (listedabove).

Step 3:
Press the POUND (#) button. If the code entered is valid for the remote, themode light flashes three times. Try using the DISH remote to control the component,if it doesn't work with one code try another.

Although we try and facilitate a one remote solution, wecannot guarantee that our codes with work for all brands and models components.Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Support Representative