Pairing the Plantronics Explorer 220:
For most
phones, select Settings/Tools, Connections, Bluetooth, On.
See your phone's user guide for more information.
With the 220 headset powered off, turn on the headset by pressing and holding the call control button for
approximately 5 seconds until the LED flashes red & blue. The Explorer 220 headset is now in pairing mode. If you
don't see the red/blue flash, press and hold the power button to turn
your headset off, and then press and hold the power button again and
hold for 5-6 seconds until you see the red & blue flash.
From your phone, go to the Bluetooth menu and select "Search" or "Add
Device". Your phone should find the headset which will appear as
"2xxPlantronics" in your list of devices.
If prompted for the Passkey (PIN code), enter 0000. If
your phone asks for a PIN/passkey, enter 0000 (4 zeros). Pairing is
successful when the LED on your headset flashes blue. Your headset is
now connected and ready to use.
Here is the link below for step by step instructions.
http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructionsGood luck from Headset Direct - 800-914-7996.
Can a passcode have more than four digits? I've already tried 0000 and the last four of my phone number. What next? [email protected]
i dont no the pin number
******* plantronics i dont have the passcode for my ps3
Please give me passkey Plantronics. explorer210
×