Whirlpool duet ghw9100lw lights on, not locked and still won't start

The pedestal part number is shown in the manual for the GHW9100LW and depends on the cabinet color. The white pedestal is LAB2700MQ. See ManualsLib, https://www.manualslib.com/manual/509178/Whirlpool-Duet-Ghw9100lw.html?page=4#manual , for the other pedestal model numbers/color codes.

I hope this helps.

Cindy Wells

Whirlpool GHW9200LW Front Load Washer 12 Cycle, 5 Temperature Ultra Plus Capacity ,Energy Star Qualified : Dove Grey on White. Machine Type‎: ‎Standard
Series‎: ‎Gold

i had it for 1 day only

Here ya go!

http://www.abcwarehouse.com/product_specs/12975_spec.pdf

Hi, I've only just come on line to see and glad that you have identified the problem yourself- as you say persistence pays. I'm not even sure that I would have been able to suggest anything myself other than 'are you sure the lock and sensor are physically working?' ;-0) John C

Could be a bad lock or possibly a bad control board. I run into this all the time, working for a maytag/whirlpool dealer and repair facility. If your in a area that has alot of power outtages or surges get a surge protector after you get your problem fixed.

You need to replace your water inlet valve

Press and hold "end of cycle" button for 3 seconds, on the right side of panel. This is the child lock feature, do it again & it locks.

If helped, pl rate me good!!

See the following Whirlpool PDF.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/eab852a13fbc842085256aa200643dd6/$FILE/Duet%20Job%20Aid.pdf

not unless you make it yourself ..replacement handle is just like the 1 that broke