Chronograph hand does not reset to 0 (12 o'clock)

Pull out the middle dialer once then try if that's doesn't work pull it again one will be the chronograph the other will be the stopwatch and if you turn the middle dialer it will change your clock

I have this same exact watch with the same problem. In November of this year, my watch just stopped with an inability to autowind itself. I'm a little mad because I have babied this watch, while only wearing it on special occasions (10x). What's the problem?

Try this.

Pull the winder out fully. Then press the top right chronograph button to move the centre seconds hand on. Then push the winder back in.

on some models you should only pull the winder half way out.

good luck

mcdevito75 here, Best Bet, call the warantee people for their suggeston.

you can find an exper in the local shop where you buy the product and they will give you specific service for your questions about your product.

In addition, and i like to play world of warcraft. there is a reliable website for

all players to buy world of warcraft gold with the lowest price wihit in 10 minutes' fast delivery and you also can enjoy first class service when your login.

Great watch! Operation should be pretty straight forward. The top button starts the chrono and stops it. The bottom button resets it. To calibrate the sweep arm into the right position pull the crown out to the first or second set position and press the start button until the sweep arm is in the start position you desire. This is typically 12:00 or 0.
If your chrono is not working then have the battery checked. If the battery has been recently replaced then make sure the watch doesn't need to be cleared.
I recommend you take this to a watch maker/technician who will be familiar with the service requirements of this model including resealing and pressure testing the watch to be sure it is sealed to its marked water resistance specifications.

Thanks!

push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

When yoy pull out the crown you will notice there are two clicks. You have to pull out crown to the first click only and then adjust a date by turning the crown.
Rate me, please.

There is no reason to panic. Your watch needs overhaul. Find your nearest watch repairer and ask to do the job. He will be able to tell you if there are any mechanical faults.
I do not think there are any and your watch will tick as brand new after overhauling it.
Mechanical watches needs overhaul every 5-7 years.