Securing your router is very easy. Here is where the manual is located.
<a rel='nofollow' href="http://www.belkin.com/support/article/?lid=en&aid=5999">Here.</a>
There are detailed instructions (on page 48) in there on how to access your router and secure it. Post up if you are still having trouble and I will see if I can be of any more assistance.
Hi there,
Connect a computer to any one of the four LAN ports of the Belkin wireless
router. DO NOT use a wireless connection, use a cable.
Open your web browser and type the IP address of the router (by default,
the address is http://192.168.2.1.) in the address bar and press Enter.
Click Login on the top of the
page to login to the router. By default
the Password is left blank, click Submit.
Click Security under Wireless menu.
Under Security, Select 64 bit WEP (or 128 bit WEP).
Select Key 1 and enter any 10 hexadecimal digits - any combination
of 0-9, A-F (26 digits if you selected 128-bit as the encryption strength). You
may also enter a pass phrase and have the router generate a key for you. Example
(0102030405060708090a0b0c)
Apply the
settings.
Please write down the key – You will need it later to configure
your and your neighbors wireless computers with the same key.
Remember to set an admin password before you close down, other vice anyone can access you
router and change the setup and admin password.
/regards
Teis
138 views
Usually answered in minutes!
×