Acer travelmate 4530 base system device driver windows 7

Hello Shawn, im not sure if windows 7 supports your bluetooth device, try visiting acer.com if your 4530 supports windows 7.

1st You download Webcam Driver.
webcam After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Other Companies Camera Drivers for Windows XP Vista Windows 7

Base system devices normally refer to the card reader. Follow the link to download the card reader driver:

http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=16

i just feel you didnt install the right driver so pls download from this link below
for Windows 7
http://www.getdriver.com/notebook/323/acer-aspire-4530-windows-7-drivers-32-bit.html

for windows Xp
http://seoroot.com/blog/driver-downloads/acer-aspire-4530-and-acer-aspire-4520g-windows-xp-drivers-download.html

get the driver here for this system

ftp://ftp.work.acer-euro.com/notebook/travelmate_4150/driver/audio.zip

Hi

Thank you for your query

Please do the following to sort out any driver issues you may have windows 7

1) Go to www.devicedoctor.com
2) Download and install the software
3) Once installed load the program and click on scan
4)Once it has finished scanning it will show you all the devices that need updating including the vga card
5) Download and install and your done

I hope this has been helpful

go to acer support.com they all ur downloads for ur particular computer

I would recommend you do a clean install on Windows 7 ie. format the hard disk etc. You can purchase a Windows 7 upgrade CD (which is cheaper to change to Windows 7) but you need the Vista CD to be able to install Windows 7.
If Microsoft has done their job properly you should not have any trouble.
I install the Windows 7 Release Canadidate version, this is the last Beta version before the final release on Oct 09 and I have found no problems with this install apart from some device drivers, but this should be resolved by then, either by Microsoft or the manufacturers of the devices.
Based on this I don't think you need to worry.

1) Get SATA drivers for Windows (whatever flavour you use)
For you who want to get driver AHCI for Acer 4530, the driver can be download here:
http://rapidshare.com/files/196616727/Driver_AHCI_Acer_4530_-_Windows_XP.rar

2) Control Panel, Add New Hardware.
3) Yes, already connected, browse to the bottom, hit “add a new device”
4) No, point it to the directory of your SATA drivers
5) Choose your driver from the list that returns. (Mine was the nVidia SATA controller)
6) Uninstall other standard IDE controllers (Not Primary nor Secondary)
7) Reboot and enter your BIOS
8) Change to AHCI mode
9) Boot to Windows… , if you success you will not meet the Blue Screen and Windows will install and find the driver automatically.
10) Windows wants to reboot. Do that.
11) Go to Device Manager and then uninstall the AHCI controller that you installed (there will be two or more now, but must Uninstall the one with the exclamation mark)
12) Success!

http://support.acer-euro.com/drivers/notebook/as_4530.html