How do a reset to factory settings on fujifilm finepix j250

SOURCE: have a fujifilm finepix s1000fd and when I use

Your cameras focus lens is probably stuck.
It operates via a long metal rod, a pin which follows a track in the side wall of the lens and a tensioned spring. one or more of these has probably jammed causing the focus lens not to move when you zoom.
Unfortunately for this camera, if you cannot free it by switching on/off, tapping the lens etc, you will have to strip the camera down to get at the lens unit. you will have to discharge the flash capacitor before desoldering the control board from the main board before removing to access the lens.
Recommend you find someone who knows about this or send to Fuji.

SOURCE: after my computer crashed i could not find the

You can download all the software from the manufacturer's web site at http://www.fujifilm.com/support/digital_cameras/software/

SOURCE: FUJIFILM FINEPIX S5000.No image on viewfinder or LCD.

I think there is a small button on the back of the camera near the bottom that turns the viewfinder off and on I think. It should be in the manual.
It might have gotten bumped while in the bag.

SOURCE: how do i put my

To set the camera back to factory settings first go to Setup Menu Options> Reset
See diagram


Hope this was a help Happy New year

Muntejaya Ginting

• 10422 Answers
• Posted on Feb 19, 2011

SOURCE: usb drivers for fujifilm finepix Z2

Please get it downloaded here : www.fujifilm.com/support/
www.fujifilm.com/support/digital_cameras/software/.../index.html
www.driverskit.com/Camera/Fujifilm.html

Kind regards, Jay