Wharfdale TU320DTR channel settings

no such brand or model

hit menu button on your remote, navigate to channel setup menu. on the sub-menu, set channel fix to your channel that you require. now when your tv powers up this will be the default channel. if this doesn't fix your issue then try cycling through video inputs tv/video button on your remote.

You should be able to get all the standard freeview channels without bothering with TopUP TV.

Follow the Instructions on Page 24 of the Manual at the link below.

http://www.tradenet.sharp.co.uk/files/Consumer_Electronics/DTR/TUTV322H/TUTV322H279.pdf

If this doesn't tune all the Stanadard Freeview Channels then you're not getting a strong enough signal for this unit so it won't be able to upgrade the TopUP TV side of it.

Hi

CI stands for common interface, there will be a slot on the side of your tv for a CI Module to be inserted, this allows you to view encrypted channels (such as ESPN) that you have to pay for using servces such as topup tv (uk).

It sounds like you have being trying to watch a encrypted channel without a CI Module inserted, this would most likely be the cause of the error message you are receiving.

Hope this helps

hi,
IT normally happens after factory reset is done. You need to reprogram the channels. Try the auto program (AUTO TUNING) Process.

1. On your remote commander " Press HOME or MENU button"
2. Scroll down to " SETTINGS or SET-UP"
3. Then to "CHANNEL SET-UP"
   
4. Select " AUTO PROGRAM " To Auto program your LCD TV and it's done..
   

Sounds to me like your hard drive is full. Do you use the topup tv part of the box? If not, deselect all the topup tv channels. This will free up a significant amount of drive. Failing that, you'll have to delete some of your programs, sorry!
To deselect topup tv channels;
Go into the menu option, Customise Top Up TV Anytime, and de-activate all the selected channels

They are 200 watts is peak and 20 watts is rms. Definitely not a lot of watts. I don't think I would recommend it for what you are looking for. Hope this helps if you need any other assistance please let me know.
Thank you,
Lee

Are you using TopUp TV or something similar? DVRs save space for these channels. If there is a select channels option you can free space by deselecting the ones you don't want.

I am guessing this is a freeview channel that you are having issues with ?

Perhaps a re-scan for channels may solve the problem or the channel may not be free, it may be topup tv channel. UKTV Gold is an example of this. What is the channel in question ??

Sounds like if you are getting the right Video and not audio then the audio are hooked in wrong. Unless you are on SAP (Second audio program) in this case take it off of Sap. If you are getting the sound that you are looking at once you change channels to view another program, then it should be easy. Just change audio jacks back to AV1, 2, 3 etc depending on which one you are using. Hope this helps!