GE 25942GE2 Cordless Phone System Logo
Posted on Dec 29, 2008
Answered

I have a Ge 25942EE4-C phone and the Cl is flashing I have looked the phone over for a button to set this can you please assist me?

Answer This Question
  • katiea194 Jan 31, 2009

    I have the same annoying problem!

  • Anonymous May 07, 2009

    The CL is flashing and I find nothing in the manuel about how to solve the problem. I tried to answer a call and the noise was terrible so I believe that it does need to be set.

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Mar 20, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Mar 20, 2009
Answers
1
Questions
0
Helped
1225
Points
38

We had this same problem and seeing that the Manual is incorrect, I searched GE website manuals to find a different one that at least looked like the right model and found out how to clear the CL message code. This is just a time/day setting and it is to be done by the handset, not the base unit, With the handset, press the flash key, then press #8. You should now see the time flashing in the display. Adjust the time then press the pound key. Now the day is flashing in the display. adjust the day with the up arrow, then press the pound key to finish. Your base unit will announce the time and day is set and the CL is gone.... good luck

Anonymous

Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on May 01, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

Joined: May 01, 2009
Answers
1
Questions
1
Helped
1225
Points
2

It took care of my problem! Thanks!

Ad

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 04, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Sep 04, 2010
Answers
1
Questions
0
Helped
1225
Points
1

If the "cl flashing" occurs after an interruption in your electricity or because your unit has been unplugged,

(1) unplug unit again from power source for 15 to 20 minutes
then,
(2) reset voice time/.day stamp as per jawolfe1962, thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Power went out in the house and I now need to re-set my GE phone model 25942EE4 and don't have the instruction book. Can't remember what buttons to press on handset to re-set the phone (currently says it...
you just need to set them in the main base for a few seconds
Read full answer
Oct 11, 2009 • GE 25952EE1 Cordless Phone
4helpful
1answer

For ge 25942ee4 5.8 ghz - i can't locate instructions. need to know how to correct the day and time on main base phone.
1. Make sure the answering system is ON.
2. Press fash/answerer/call waiting button on the handset to enter answerer remote
mode.
3. Press key [8] to enter Time/Day set menu on handset.
4. To set Hour, key in [00]-[12].
5. To set Minutes, key in [00]-[59].
6. To set AM/PM, press the CALLER ID-VOLUME (5or6) button.
7. Press #PAUSE/ringer button to confrm the setting.
Read full answer
Sep 30, 2009 • GE 25952EE1 Cordless Phone
0helpful
1answer

Phone not working
CL means, you need to set the MIN, HOUR, DAY/CHECK. These buttons are on the back of the unit. You need to start with MIN, then HOUR and last DAY/CHECK. Hold the MIN button down to start the set up. You release the button on the correct selection. The button is slow to react, you might need to circle around to get the correct timing to release your figure from the button. The same with the other buttons. I was very glad to stop the flashing of the CL and number of calls on the answering machine. (my house lost power and all the clocks needed to be reset, this was the biggest clue. So CL either means CLOCK or CLUE.)
Read full answer
Aug 28, 2009 • GE Lands Phones
0helpful
1answer

Flashing CL
Find the button for day,and set the day, find the hour button, set the hour, and find the minute button and set the minute, then the phone will not flash CL
Read full answer
Feb 03, 2009 • GE Telephone pr521w
1helpful
1answer

GE Base 25942 Flashes Cl
You can download the phone manual here:

http://www.home-electronics.net/ge/pc/IB/25942GE2_IB.pdf

It explains the time/date setting (done from the handset).
Read full answer
Jan 04, 2009 • GE 25942GE2 Cordless Phone System
4helpful
1answer

Cl and 0 flashing
Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.
Read full answer
Dec 28, 2008 • Uniden Cordless Phone
9helpful
2answers

Answering machine is flashing CL after I lost power
set the CLock by holding down the buttons on the side of the answering machine - top button for day, middle button for hour, bottom button for minute
Read full answer
Sep 25, 2008 • GE 25932 Cordless Phone
2helpful
1answer

CL code
My phone was also flashing CL and the 0, after a power outage. After I set the date and time it was fixed. Press the flash button on the handset and use the caller ID buttons to set AM or PM; use the numbers to input the correct time. Then press #. Repeat for setting the day and press # again.
Read full answer
Aug 21, 2008 • GE 29871GE3 Digital Answering Machine
1helpful
1answer

CL Flashing on LCD SCreen
Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.
Read full answer
May 21, 2008 • GE 27996 Twin Cordless Phone
0helpful
2answers

GE 25942EE-C model date time stamp
I cant program my phone.The CL light flashes and I cant do anything.
Read full answer
May 20, 2008 • GE 25942GE2 Cordless Phone System
Not finding what you are looking for?

View Most Popular

25942GE2 Cordless Phone System

  • Lands Phones

Related Question

Power went out in the house and I now need to re-set my GE phone model 25942EE4 and don't have the instruction book. Can't remember what buttons to press on handset to re-set the phone (currently says it...

  • GE 25952EE1 Cordless Phone

Related Topics

1,235 views

Ask a Question

Usually answered in minutes!

Popular Questions

UNLOCKING CODE FOR PARIS HILTON'S DIAMOND QUEST FOR SAMSUNG G600

GE 29255GE2 Corded Phone

Instructions ge digital messaging system 29888GE1-A

GE 29888GE1 Digital Answering...

GE Digital Messaging System Model # 29875GE1-B

GE 29878GE1 Digital Answering...

I don't know how to turn off the Do Not Disturb

GE 21028GE3 Cordless Phone

How do you retrieve messages from another phone?

GE 29871GE3 Digital Answering...

Top GE Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...