How do I got the verizon logo to get off my front screen

Contact Nikon Imaging Support Parts are sold only thru the factory and their authorized reps.

dwon side?
the lower part, is steel, the door has shell frame,
its cold rolled punch pressed steel.
the covers inside are plastic.

hi..
Sounds like a loose ribbon cable -- the one that connects the screen to the circuitry inside the camera.
Try squeezing the body of the camera near the bottom 'Samsung' logo, to try to snug-up the connection. Brace the front (under the lens) with your index fingers, and press firmly with your thumbs on the back over the logo just under the screen.You might try squeezing around the other edges of the screen for good measure in case something else came loose.


thank u
rate me

this is a software problem !!! change the software fo your mobile in the nearest outlet

put a battery on it turnit on off on offf,,,,,if not throw it away!!!!!!!!!!!!

I hate to be the bearer of bad news but the only thing i would say try is taking the battery out for about 30 seconds. putting it back in and trying again. if it does not turn on then i'm afraid the phone will not come back. It's a somewhat rare problem but does happen.

Unfortunately all information is gone unless you had downloaded backup assistant.

its the short circuit in main board chip ic number IC431 OR IC436 check out .that faulty ic needs replacement.

Operator logos cannot be changed unless an option is available. upon downloading the new operator logo ur previous one will be deleted and new one will be visible.

Thankyou

Sounds like you should take it to have it looked at. Theres something up. The verizon thing only appears when the phone is opened so there must be something out of place in it so your phone can't read when it's closed. So I really can't help you there. To set the phone calls to answer automatically go to "menu" then "call settings" under "settings & tools". Now go to "in-call setup", then "answer options" and under there you'll find the choice to change it to open to answer. Hope this helped!