Armitron Pro Sport Watch Hourly Chime

Irene, try the link for watch instructions.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://ca.search.com/web?q=armitron%20sports%20watch%20instructions&qsrc=0&src=jo&gch=230&clickid=16654505391224692147

Hold A, and B and press C, mine shut off

try this link
http://www.armitron.com/watch_instructions.asphttp://www.armitron.com/watch_instructions.asp

here's a simple instructions of setting your watch


Watch setup instructions
for the Armitron Instalite All-Sport :

Mode B / \ C Date
' '
Light A \ / D Alarm

_____________________________________

Set time time / date

Press and hold B (Mode) untill alarm hours flash
Press D (Alarm) to advance these

Press B (Mode) again, seconds will flash,
press D (Alarm) to advance these

Press C (Date), minutes flash, press D to advance these

Press C again, hours flash, press D to advance these

Press C again, month flashes, press D to advance these

Press C again, Date flashes, press D to advance these

Press C again, Date flashes, press D to advance...... [suggestion from Chikita]]

Activating/Deactivating Hourly Chime

1. From "Normal Time Mode", press and hold "D" (Alarm) and
at the same time press "C" (Date) once. Hourly chime symbol,
( a house shape) appears in "chime" windows to indicate
the hourly chime will beep every hour.

Activatin/Deactivating Alarm

2. With "D" (Alarm) still pressed, press "C" (Date) again. Alarm symbol
( a clock shape with waves above it) appears in the
upper right to indicate the 24 hour alarm is now activated.

[I assume this "toggles" between off and on states,
so performing it again should turn off the alarm]
i hope this will help you.

These are the instructions posted on the Armitron website. I hope they help.

1. From Time Telling Mode, press 'B' twice to enter the

Alarm Mode.

2. Press 'A'. Alarm Hours flash. Press 'C' to advance the

Alarm Hour.

3. Press 'B'. Alarm Minutes flash. Press 'C' to advance the

Alarm Minute.

4. Press 'B'. Alarm Time Zone flashes. Press 'C' to select

either Time Zone 1 or Time Zone 2.

NOTE: The Alarm is available in one Time Zone only.

5. Press 'A' to end set sequence.

6. Press 'B' to return to Time Telling Mode.

ACTIVATING THE ALARM AND HOURLY CHIME

1. While in Alarm Mode, press 'C' to activate the Alarm.

The Alarm symbol appears to indicate the Alarm will

sound at the preset Alarm Time for 20 seconds or until

'A', 'B' or 'C' is pressed.

2. Press 'C' again to activate the Hourly Chime.

"CHIME" appears to indicate the Hourly Chime will sound

every hour on the hour.

3. Press 'C' again to deactivate the Alarm.

4. Press 'C' again to deactivate the Hourly Chime.
5. Press 'B' to return to Time Telling Mode.

I don't know whether this is what you are looking for, as the watch comes with no packaged instructions OR general support, on their website, XD,

Nik.

http://home.earthlink.net/~eldonenew/armitron.htm

or

http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html



Armitron All-Sport Watch Instructions By Brian Walker eHow Contributor 9 Found This Helpful The Armitron All-Sport is a unisex style of watch made by Armitron that features a digital readout and four buttons around the outer dial for adjusting various aspects of the watch. It can set alarms, keeps the time as well as the date, and has a built-in backlight. Accessing and adjusting these various settings is a fairly simple process.

Other People Are Reading

• How to Set an Armitron WR330 Watch
• How Do I Change From Military Time on My Armitron Watch?

Setting Date, Time and Alarm

• To enter the date and time setting mode, press and hold the "mode" button, located on the top-left of the watch. Continue holding this button until the display begins to flash. This first display is the alarm setting, should you choose to set an alarm to go off. If you'd like to set the alarm, use the "alarm" button on the bottom-right of the watch to advance the hours to the desired one. Then press the mode button again; this will cycle through the minutes and seconds of the alarm to allow you to set those as well. Once you have set the alarm, you can press the "date" button at the top-right of the watch to proceed to the regular time setting. These numbers, which will now be flashing, also are adjusted by pressing the alarm button to change them. Pressing the date button again will now cycle through the hours, minutes, seconds and the date. As you continue to press the date button, the All-Sport will continuously cycle through these options; don't worry if you forget to set one, you can simply press the date button a few times until you get back to the setting you need to change. Once the alarm, time and date have all been set, you can press the mode button one more time to exit to the normal watch mode that will display the date and time.

Using Chime and Alarm

• The Armitron All-Sport features both an alarm and an hourly chime. The alarm function will cause the watch to continuously beep at the selected time until you turn it off by pressing a button. The chime will cause the watch to beep once every hour. You can turn both these features on and off by pressing and holding the alarm button and while holding it pressing the date button. The first time you do this, the chime will turn on and a small house symbol will be displayed on the watch face. Performing this button-pressing sequence again will turn on the alarm, which in turn displays a small clock icon on the watch face. Each successive pressing of this button sequence will alternate between the chime and the alarm, turning them either on or off.

Backlight

• The All-Sport also features a built-in backlight to help you view the watch in dark conditions. This light can be activated by pressing the "light" button on the bottom-left of the watch. Pressing this button is the only way to activate the light, and doing so will only cause the watch to illuminate for a few seconds at a time.

Read more : http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html

Press and hold the bottom right button; this displays the alarm. At the same time, press the bottom left to toggle the hourly chime. When the chime is enabled, the 'day of week' display at the top of the dial will show all days as selected. When the chime is disabled, no days will show as been selected.
I have one of these watches and it took me a while to find this out!
HTH

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all ARMITRON watch manuals. Rate me, please.

Armitron alarm/chrono
1.To set the time hold the mode button until the alarm flashes, then hit it one more time and the time will flash to be changed. Once the alram or time is flashing use the ST/STP button to navigate between hour, minute, month, day and day of the week, the ADJ button changes the numbers.
2.While holding down the ADJ button use the ST/STP button to turn off the hourly CHIME and the ALARM chime.
Hope this helps!! K~~