I had sound but no picture on my Element Electronic FLX 3211B LCD Television Set. I replaced two capacitors, and now I have lit screen by turning on the tv on the side panel. Remote does not control the tv and no indicator light are on. But the tv screen is lit. the indicator light and the remote controlling the set may be the same problem. Does anyone know how to fix this ?

check for two leaky capacitors in the power supply section. Should be two 10uf 250V caps with bulging tops. If you see this, that's your problem.

I had the same issue with this TV in my hotel room. I set the FLX3211B TV up as an extension of my laptop, but had to change the refresh rate from the default 58p Hz to 60p Hz for the digital TV display. Once I did this, it came right up.

The fact that the light isn't on is a sign that you lost Standby Power. Most likely you have a fault with the power supply board.

What I have found on this tv is the inverter board is integrated with power board you might want to head over to badcaps site on this one.It could be as simple as replacing 2 transistors and a fuse.

The tv have a long board called a LCD inverter board it is dying.This LCD inverter board help the tv LCD screen panel to have a backlight for the tv LCD screen panel to produce a picture.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish a new long LCD inverter board for the replacement.

Tv turn on now,u have a flashes of a picture only few sec. than dies and have sound left only?Yes,this problems are those 1 or 2 long board call the LCD inverter boards are dead.These 1 or 2 long LCD inverter boards help the LCD screen panel to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy those 1 or 2 long refurbishes LCD inverter boards for the replacement.

Hi lauryic, did you solve your problem? I have the same problem!

-Al

change your tv main board

Found out we are still under warranty and have a serviceman coming tomorrow.

Two bad capacitors in the power supply. 450v 10uf