Manual panasonic kx-tg6

It sounds like Forwarding may be set to that extension?

https://www.manuals.ca/panasonic/kx-dt543/manual?p=10

..

1. lost the manual>
2. yes
3. get it by googling or ask Panasonic, for it.

google , bingo
page 21, bingo 2.

https://www.manualslib.com/manual/1362369/Panasonic-Kx-Tgc380c.html?page=21&term=forward&selected=1#manual

this only works if your service provider offers it, so all them first.

The KX-TG6702 is a standard POST 2-line landline cordless telephone system. You can transfer a specific call between handsets using the Intercom without changing the line that the call came in on. Then you can use the second line for other calls, if the wiring and phone subscription is set up for that. However, if you want to forward any call to another phone number, you will need to connect your telephone provider and set up call forwarding. Follow the directions from the provider to use the service.

The manual for the KX-TG6702 is available on the product support page: http://shop.panasonic.com/support-only/KX-TG6702B.html . The direct link to the manual is currently ftp://ftp.panasonic.com/telephone/om/kx-tg6700_en_om.pdf .

I wish that I had better news for you.

Cindy Wells

go google and down load the user manual for your cordless phone
type in --user manual for Panasonic cordless phone model kx-tgca21s -- download any pdf version and follow the instruction in the manual
call Panasonic direct on their help line number and have a technician talk you through how to connect as you want

Press the FWD/DND button.

Check out the manual for more information;

http://www.ask-tsc.com/pdf/KX-T76xx.pdf

here is the user manual and support page:

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Telephones/DECT-6-0-Phones/Operating-Instructions/model.KX-TGA106M.O#ts

Good luck

Thanks

The simple answer is on the intercom dial *7102 9 number #. That forwards all calls outside. However, outside line and trunk-to-trunk programming has to be programmed into the system.

There are other conditions located in the Operating Manual under Call Forward. In mine, it's on page 71.

Carl

Call forwarding isn't a "feature" on a telephone. You have call transfer to another handset, probably described in your manual, or Central Office call forwarding, the standard CF that works without the TG6500. You set that by following the CF instructions provided by your dial tone provider, usually a sequence that starts with 72#.

Carl

press FWD/DND then press 0

To remove forwarding, lift your handset, push the FWD/DND key and dial 0. Here is the quick manual for that model - http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF