Indesit W 123 Front Load Washer Logo

Related Topics:

Daniel Ruiz Posted on Apr 09, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My Indesit Washing machine doesn't seem to start?

Recently the machine has been working fine but on day one of the pipes leaked and maybe spilt some water on the top of the machine. We quickly turned everything off but just before, the machine cycle knob turned 360degrees before stopping and afterwards producing a burnt smell. We checked if any water had gone inside, but we found it completely dry. Now the machine won?t start. When we push the on switch we can hear a clicking noise and the light vaguely comes on then off but it just won?t start. Could anyone please help? Thank you

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,294 Answers
  • Posted on Apr 11, 2007
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Apr 11, 2007
Answers
1294
Questions
1
Helped
901093
Points
3465

Most likely water has short-circuited your controls; you need a specialist here.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to open the top of Indesit wil 106 washing machine.\?

unplug the machine and remove the two screws at the rear of the top panel take it off check there are no leaks in the pipe works eric
0helpful
1answer

Indesit widl126

It sounds like the seal is worn out around the hose possibly or it is just loose and needs tightening. Depending on how old your machine is, the hoses get dried and cracked over time as do the seals.
0helpful
1answer

Indesit iwme12 fills with clean water when not running

sounds like a faulty valve. it maybe weeping, leaking water in.
0helpful
1answer

Hoover optima washing machine is leaking very badly . I have stripped the machine down and cannot find the leak . Inlet pipes clear. Cleaned soap drawer and two feeder rubber pipes don't seem to be a...

Hi,maybe the draw dispencer is damaged,I wouldnt think it is the drum seal,what I would do is tilt the washing machine so that the top of the machine is leaning against the wall so that the front of the machine is of the ground,then while you get underneath the front on the floor with a torch get someone to put water in the dispencer and see if you can see where the water is leaking from,I hope this was some help,all the best.
0helpful
1answer

Water leaks from underneath Indesit WG1130d washing machine.

I had a problem like this and it turned out to be the hose that carried the water out to the drain was overflowing the drain pipe.
Make sure the P trap in your drain line is open and clear. A plumbers snake, draino, or a high pressure nozzle on your garden hose might help to clear it.
0helpful
1answer

When water goes in,then it starts leaking from underneath-have checked for blockages.Spin seems slow and not washing clothes?? Then dial seems to go around sometimes on its own???Help!

has the bearings been replaced recently or may need replacing it has been known that should a bearing get a bit sloppy then the drum rubs on the outer caseing wares a hole in it the outher casing is plastic
0helpful
1answer

IWater Leak from LG12225FD Washing machine

may be pump...hose seal... in outer tub...cracked inlet valve cracked hose inlet to tub
0helpful
2answers

Indesit w123 washing machine

Suggestion: The pipe behind your machine has to have a certain height (the machine drain pipe); it does not go directly into the drain at floor level. Check this out.
Not finding what you are looking for?

341 views

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...