My Nikon F80 won't load y film automatically, it has a FEE error on the screen but i don't know what that is??

Dead circuit - return to seller and get refund

I'm glad to provide the manual for the Nikon F80 Camera. Please click hear to download the same.

Please let me know if you require further assistance.

Sigma makes lenses with a variety of mounts to fit a variety of cameras. A lens with a Canon mount won't fit onto a Nikon camera, for example. Assuming the lens has the proper mount for your camera, it should fit fine.

The F80 was called the N80 in North America. You can download the N80 manual from
http://butkus.org/chinon/nikon/nikon_n80/nikon_n80.htm

You'll find illustrated instruction for loading film beginning on page 20.

This is found in the F80 manual page 99. it means the CPU Nikkor lens (other than G-Type) is not set to its minimum aperture. Solution: set the lens to the largest f/stop such as f/22. This FEE error is the same for almost all Nikon cameras, be they film or digital.

Here is what to look at: Custom Function number 8, "Auto film load when back is closed", default setting is 1 disabled on 0 it is enabled. If you have the manual for the F80 (same as N80) look on page 21 and page 72 and 73.If that is not the issue check the following: With the new batteries does the camera turn on, Can you focus, does the LCD light up? All that will let you know if you are getting power to the camera. If the answer is yes then the film should load so now check the inside of the camera back. Does it have the pressure are and roller next to the hinge. If that is missing then when you pull the film to the red dot, close the camera back there is nothing to put pressure on the film for it to load.

You can force your camera to rewind, but you will have a partially shot roll of film. If you continue to shoot your counter will be off but when the film cannot advance any more the camera will rewind.

Turn the camera on. Open the back. Insert film, pull it across to the red mark. Close the back.

Camera should load automatically.

You can get the manual at http://www.butkus.org/chinon/nikon.htm

It should automatically rewind when the roll is at the end. For mid-roll rewind press both the rewind buttons simultaneously for about 1 sec and the film will rewind.

try inserting the film again.