No Remote, Can't Switch to AUX

Normaly on the TV buttons thera are a buton named AV or sometimes with the Menu buton on the TV - if you have only Vol +- and Pr +- then you need a remote - sory

not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

My beko tv can to tune to the pal BG to give me the sound. it only gives me picture, when i try to tune it to get the sound i only get the pal I insteard of the pal BG. the tv came from the UK. can sombody give me some code to change from pal I to pal BG? thanx.
Oliver. [email protected]

not worth buying a remote, you can use an rf converter or what i did was use an old DirecTV remote as i have several. on DTV remote, set selector switch located at top of remote all the way to the right to tv. Then hold down the select and mute button at the same time until the green light blinks 2 times, then enter one of these codes until the power button turns on the tv. Codes are as follows
10236 10463 11463 10179 11911
11929. Also verify that the tv input button does activate the aux channel. I knew these old remotes would come in handy some day.

I WANT TO KNOW THE SAME MANUALLY SWITHCHING TO AUX

I can't exactly help you, but can you tell me how you programmed the remote to your TV, because I cannot get mine to work...

Hi you have obe of two options have you tried leaving the dvd plugged in then switch it off at plug leave the telly on then switch the dvd on at plug then switch dvd on usually it pick up the signal on it own if this dont work you will then need to buy an all in one remote let me know how you get on ok.
These remotes are cheap to buy and do work

pusht the ANT button

found a remote that works at radio shack. RCA 4 device remote model #RCR4383N. I first tried to manually enter the emerson codes but they didn't work. Used the automatic code search and it was working within minutes. The input-tv/vcr button on the bottom right of remote switches between AV and coax like it should...$10.00