How to connect sony home theatre with sansui lcd connection with tatasky hd.

You can use the Component Video, composite video or HDMI connections to connect the DVD home theatre system to the TV.

See the manuals on this site.
DVD Home Theater System

try to get an HDMI hub for your extension on the home theater

Hi,
Change/ reduce HDMI resolution in DAV-DZ810 so your tv can get proper video signal because it seems DAV-DZ810 is set on bit higher picture resolution and tv is unable to present that picture.
Thanks.

I assume you mean the TV sound only comes out of the TV. THAT would involve internal audio controls at the TV.

Why don't you just connect the TV-related audio directly from each source to the DAV instead of through the TV, which adds NOTHING to the sound quality and may even degrade or limit it.

Hopefully the tv has multiple HDMI inputs.....
Plug HD cable box straight into tv with HDMI
All other inputs into home theatre
HDMI from home theatre to tv HDMI

Just choose how to wiring below;


DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..

• Audio and Video Connection Guide
• What is HDMI Technology?
• HDMI Explained in Detail
• Audio and Video Definitions

Plasma or Video Projector Wiring Guide
Blue-ray Surround Wiring

HP TVs - TV Cable and Connection Types

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

you are to buy component to HDMI adaptor.

http://esupport.sony.com/perl/tutorial-display.pl?tut_id=438 go here it will help

the best thing to do is if ur lcd has a phono in/out is to connect ur theatre system through phono straight to the tv as then everything that comes up on the tv comes throught the theatre system

Connect the cable box outputs to an open set of inputs on the receiver, and that should do it...accordianman