Has anyone seen a diaper changing table that comes with a hamper contained within it? I don't want lots of separate things all over the nursery.

Don't worry, there's no right way to use a changing table. The important thing is to make sure you have all the right stuff with you before you start changing your baby's diaper as you can't leave them unattended half way through to go and get something. Check out this YouTube video that gives a detailed but easy to follow guide to changing tables.

You will be really pleased to know that they actually do make changing tables to fit into corner shapes. We bought one even though our nursery wasn't a strange shape, because we found it really saved on space. Here's a link to one on the Amazon site http://www.amazon.com/Badger-Basket-Diaper-Changing-Natural/dp/B00030088Q

I saw a white one on the Amazon site. Here's the link: http://www.amazon.com/South-Shore-Savannah-Collection-Changing/dp/B0006HJDQE/ref=sr_1_2?s=baby-products&ie=UTF8&qid=1344941600&sr=1-2 If you don't find what you are looking for you can always strip the wood down and paint it white yourself.

A changing table is usually a set of drawers that have a flat surface on the top where you can put your baby for diaper changes. They look like this:

I'm thinking no shelves since you don't want other people who walk into the room or even yourself see the mess that shelves may have, so drawers are the best way to hide a mess. I would also get 2 or 3 drawers, in the upper part, for the diapers and the rest just wide drawers all the way through. I would also consider having a corner changing table (if you have it custom made) it can save you some room and look really cool and special.

Annoying! happens to us too frequently, but this works. We ended up buying a new one and returning our broken one after owning for three months From Manual:) 5. Turn on the Nursery Unit using the On/Off switch on the side. The green power light should come on. 6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off. A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use. 7. If the top four (4) LEDs do not shut off, power off the Parent Unit and the Nursery Unit and repeat steps 4 and 5 above. 8. If the connection LED on the Parent Unit does not change from red to green and the unit begins to beep, press the channel "ch" button on the Nursery Unit. Within a few seconds, the Parent Unit should lock in on the Nursery Unit and the connection LED should change from red to green. You may hear an audible beep during this process. 9. If the Parent Unit is still unable to lock in on the Nursery Unit (connection LED will be red and the unit will beep), power down both the Parent Unit and the Nursery Unit. Wait for 10 seconds then hold the volume down button on the Parent Unit while pressing the On/Off switch. When the unit powers up, you will hear a single beep and all of the soundlights will illuminate. Release the volume down switch and within 2 seconds you will hear two beeps and all of the Sound Light LEDs will stay lit and the bottom LED will be red. 10. Repeat steps 5