How to turn on rca th1101

Hello,

Support site for the RCA TH1101, see:
http://support.rcaaudiovideo.com/product.aspx?product=27

Manual:
http://www.voxxsupport.com/images/manuals/TH1101/media/TH1101_UMEN.pdf

Quick start guide:
http://www.voxxsupport.com/images/manuals/TH1101/media/TH1101_QSEN.pdf


Turning the player on
1. Check the polarity of the battery plus (+) and minus (-), matching the indication in the battery compartiment
2. Switching the player on viewing next image, moving switch 2 towards the USB connector until the display shows up.


When the player doesn't respond, the firmware could be corrupted.
Run or Download first and run later, the Pearl firmware version 2.0 with next link from the support page or with the direct link:
http://www.voxxsupport.com/images/downloads/PEARL_FWUtility_v2.0.exe

When more help is needed, just post a comment.

Update the firmware at www.rcapearl.com

thats because when you turn it on you are u are pushing it over too far. you push it over barely to turn it on. look closely at the button that turns it on and you will see it

Hi - You can download the manual by clicking the link underlined in blue below:

TH1101

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

simple. The Pearl Series for RCA is AAA battery powered. You cannot charge it through your USB port.

you get from here:
http://www.antonline.com/p_RCA--TH1101--RCA-TH1101-PEARL-SERIES-THUMBDRIVE-MP3-PLAYER-(1-GB)-_312319.htm

Go to RCA's website for full documentation

Make sure the SD card does not have a storage capacity greater than the internal memory of the Mp3 player, or the Mp3 player will not reocgnize it in many cases.

-Tha Mp3 Doctor

I do not know about the color change but here is the number to RCA main support 580-634-0151

srry guys still workinout to find the problem myself i bought2 rca's and both brokin i work at CEE Computers Electronics Engineering.poat back later