I need to find a Codec download - Sanyo ADPCM (125)

Get the XP drivers fro the card in question.

I'm not sure if your camera requires special procedure to export files or maybe dedicated video player. To try if are files using any standard codec. Make copy of your MPEGTEMP.009 file. Rename copy to "test.mpg" try to play that file .you may want to download free vlc player.it plays almost everything.

Hi, well the answer is CODEC's this is why your media Player will not play your video.
You need to find out what CODEC your Camera stores it's images with.
Then you can either get the CODEC that will enable your media Player to play the Video.

Below is your user manual, it tells you in there what CODEC the Video is encoded in.
Usually it is in some MPEG4 format.
I suggest that you get a copy of KMPlayer, this will play almost anything that it can open. link below.

http://kmplayer.en.softonic.com/
Below is your user manual to download. www.sanyo.com.au/.../manuals/.../vpcx1200exbk_im_advanced.pdf

Just go through this forum at the topic of ADPCM !!

i usually dont wait for windows to download the codec. I just download a codec pack that downloads most used codec and Install it.  It saves me a lot of time. here is a website of a free codec pack and a media player that does not use a lot of cpu resources  http://www.free-codecs.com/download/K_lite_codec_pack.htm

Hi,

I googled on your need and could find the following codec installer. I hope, this solves your problem. :)

http://www.sanyo-audio.com/download/software/download/icr/s_ldadpcm.exe

I am sorry, but the installer is a compressed executable. Extract with some extractor like winrar / 7-zip and then run the setup.exe. (It installs a device driver for windows - You have to accept it in windows XP)

If you are not able to extract/ proceed with installation, please comment here again and I will upload it somewhere as zip/rar.

Hope your problem is solved.

:)

Bye. Have a nice day. 

Where can I find the Intel IMA ADPCM (11)?

digital wave player needs that codec in order to work... check your codec or update your codec in the audio codecs. also you may need to uninstall the program and clean your registry. have you tried this on another computer?

I think you have a codec problem.You should download a codec pack such as FinalCodecs2008 or K-Lite Codec Pack
Remove any previous installed codec pack and install one of these two and you should't have problems running any movie file! I have FinalCodecs2008 and I didn't had any problems.Hope you'll listen to my advice ;)

Hi,
I googled on your need and could find the following codec installer. I hope, this solves your problem. :)

http://www.sanyo-audio.com/download/software/download/icr/s_ldadpcm.exe

I am sorry, but the installer is a compressed executable. Extract with some extractor like winrar / 7-zip and then run the setup.exe. (It installs a device driver for windows - You have to accept it in windows XP)

If you are not able to extract/ proceed with installation, please comment here again and I will upload it somewhere as zip/rar.

Hope your problem is solved.

:)

Bye. Have a nice day.