Kodak EASYSHARE 5100 All-In-One Printer Logo
Anonymous Posted on Dec 17, 2008

Printer Kodak Easyshare 5300 Will not print black ink

Kodak Easyshare 5300 I have a 5100 that just had the black print cartridge replaced. It will only print color no black will print. I followed the solution provided by Kodak staff and it still will not print black. Does that mean the printhead is bad?

  • 6 more comments 
  • suecando53 Dec 18, 2008

    I have the same problem. I replaced the black ink cartridge and now I can't get it to print any black. So frustrating.

  • beccalh58 Dec 18, 2008

    Will only print in color no black text

  • featherwear Jan 07, 2009

    exact same problem - have tried everything - no luck

  • Anonymous Jan 12, 2009

    I replaced both ink cartridges on my 5100 printer but it will not print black. Please send me another print head and ink cartridges to see if this will fix my printer.

  • verbalsoup Jan 15, 2009

    both cartridges are new. for a while it would print color but no black, now it won't even print color.

  • bkworm8it Feb 17, 2009

    my printer has stopped printing anything in black. If the words are black font nothing prints. If they are in a color other than black the words print so i'm missing anything in black

  • littlejulian Mar 15, 2009

    I have the same problem with an EasyShare 5300

    Also, has anyone found a way of printing photos of size 45mm X 35mm required for UK passport renewal? I went on technical support chat line with Kodak but so far this not resolved


  • CAKuhl Mar 17, 2009

    same

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Jan 20, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Mar 19, 2008
Answers
9
Questions
0
Helped
7930
Points
17

Just remove the head printer and wash with warm water and lett.t dry and replace.t

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 18, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 17, 2008
Answers
1
Questions
1
Helped
758
Points
1

They overnighted a new printer head and free ink. We already recieved it. AMAZING. Thank you Kodak. They are awesome.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kodak 5300 All In One Printer. Black ink quit printing.

Hi there.
It could be the chip in the cartridge... faulty for printing?
Settings in the printing process?
Iceman.

0helpful
1answer

My 5300 printer won't print black ink. I just

Replace the printhead. call kodak at 1.800.421.6699 for a free new one, with FREE ink, too.
0helpful
1answer

Kodak 5300 will not print black very bright

try doing a print head cleaning once or twice and try replacing the black ink cartridge and make sure it is genuine Kodak ink cartridge as there are many look alike and refill inks sold by retailers.......if still does not work print head issue and you may contact Kodak Tech support,,,,,,,,,,,
0helpful
1answer

Printer will not print black ink

Seems to be a common fault with Kodak EasyShare 5100/5300

Contact Kodak Support and go though the following tests:

Remove and re-seat Printer Cartridge(s) - Done

Clean Printhead - Done

Calibrate Printer - Test Sheet Not Complete!

Run Computer Colour Test - Done

They will then send you a new Print Head.
1helpful
1answer

Says replace ink cartridge

I have replaced my ink cartridges numerous times and they are still full. It keeps telling me the ink cartridge needs replacing. It won't print and the red light keeps blinking. I have disconnected the usb and the power. I have only had this printer for about a year. It won't scan or print. Its a Kodak Easyshare 5300. The HomeCenter AiO is disconnected so how do I contact anyone from Kodak?
2helpful
1answer

Changed ink cartridges Kodak 5300 print blurry/missing letters

I called Kodak and they are sending me a new printer head at no charge! Can't get any better then that. Man I talked to was very nice, knowledgeable and polite.
1helpful
4answers

Printer kodak easyshare 5300

You will need a new printhead call 1.800.421.6699 to request one. Please rate. Thanks!
4helpful
1answer

Printer Kodak Easyshare 5300 Will not print black ink

Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.
0helpful
1answer

Black ink non-printing

Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.
Not finding what you are looking for?

768 views

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...