Do not know how to look through the caller id

I you're running on a CiX or CTX platform, you're dealer or system administrator needs to enter the amount of CID calls to be buffered on that particular phone. This can only be done via the System Administration Program.

Caller ID with Call Waiting is available by subscription from your Telephone provider. With this service, you will be able to view incoming caller information while on a call with another user.

This will allow you the ability to select to talk to this user and put your existing party on hold or make the decision to ring them back.

But, you must contact your Telephone provider and subscribe to the service.

Here is the link for the User Guide: http://www.uniden.com/pdf/TRU9380-4om.pdf

Remember, If you subscribe to Caller ID from your phone company, your phone will show you the caller's phone number and name (if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also shows you the name and the number of any call that comes in while you're on the line.

• Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .
  
  
• Is the battery old? - Replace the battery.
  
  
• Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.
  
  
• Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.
  
  
• Do you have Caller ID service with your telephone company - In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. If the Caller ID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.
  
  
• Caller ID shows up after second ring - Be sure to wait until the second ring before answering. Caller ID signals comes through after the first ring, if caller pick ups phone too soon Caller ID signal will not be transmitted to the handset.
  
  
• Confirm that caller ID is still working on that particular line by checking another phone on the same line - If Caller ID is not coming through contact your phone company provider.
  
  

If this does not fix your problem, contact your authorized Service Center.*

Hello! I'll need the model number to get started on your problem...

Guru................saailer


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Adding call waiting as a feature to your telephone can help you take calls that you are waiting for without having to stay off the phone until that important call comes in. With call waiting, you get a beep when you are on another call to let you know that another call is coming in. If you want to take the call, you follow the simple steps outlined in this article.

1. ep 1 Order call waiting from your phone provider if you do not already have it. Cal waiting works best with caller ID features that give you the phone number and name of the person calling you. Phone numbers that have blocked numbers or use *67 to mask their caller ID will not show up on caller ID.
   
2. Step 2 Take a call when your phone rings. While you are talking on the phone and hear a beep, you are receiving another phone call. Using your caller ID function, whether it's on your answering machine or on your handset for the telephone, see who is calling you. If you want to talk to them, quickly press your "talk" button to put the other call on hold or disconnect. Press "talk" again to take the incoming call.
   
3. Step 3 Disregard the other phone call if you do not want to terminate the call you are on. The new call coming in may go to your answering machine. Or if you have the call back feature on your telephone, you can simply call *69. Your phone will dial the number of the person whose call you just missed.
   
4. Step 4 Use call waiting as politely as you can. You might tell someone who you are talking to that you are expecting an important call and may have to terminate the call abruptly. Call waiting calls should be answered as quickly as you can. After four rings, most phone calls go right to the machine or people hang up. Promise to call your first caller back if you have to interrupt the call
   

Go onto the menu of the handset and set caller id to on.

go on settings and on call settings and caller id

• If you answer the call, the number (or number and name) stays on the display until either you or the caller hangs up.
• If you do not answer the call, most display units keep a record of the calls received, including the phone number (or number and name), date, and time.
• If the letter P, priv, private, or a similar term appears, the caller may have blocked the display of his or her number.
• If the letter O, ????, out of area, or a similar message appears, the caller either is in an area that does not support Caller ID or has placed the call using operator assistance.
• Caller ID comes with Anonymous Call Rejection, which, when active, allows you to reject calls from callers who block their number. Your phone does not ring, and the caller hears a message saying blocked calls will not go through.
• To turn on Anonymous Call Rejection, press
  *77 on a touch-tone phone (or dial 1177 on a rotary phone)

• To turn off this service, press
  *87 on a touch-tone phone (or dial 1187 on a rotary phone)

or go through
http://www.decommunications.com/support/topics/repairs/phone/no-id-name.php

To redisplay the Caller Id Number, press the Line button again.Caller ID Scrolling is possible if you have a MIF-F(C)-10 card in the system and you have a Scroll key programmed on the phone. If you need further assistance, let me know.

Some phones are not equiped to pick up call waiting caller id. check the box or look up your model number on the uniden site. The call waiting caller id only shows up on the phone that is in use at the time of the call.