My kodak m1063 ask for a sd4g, the one i bought was too small in

Hello, Elsie -

The user manual for the Kodak EasyShare M1063 camera states it takes a Kodak Li-Ion rechargeable digital camera battery, KLIC 7001.

See the user manual (PDF document) here:
http://resources.kodak.com/support/pdf/en/manuals/urg00868/M1063_MD1063_MX1063_UG_GLB_en.pdf

Page 1, Step 2 even has an illustration of the battery and the direction in which to install it.

If the battery still does not fit, I suggest you visit a nearby store which sells cameras and camera equipment and ask one of the individuals working there for assistance with the battery and camera. (Take the camera and battery with you.)

Best wishes.

The Z740 uses SD cards, up to 2GB in size. Your new 8GB card will not work with this camera.

The DX4530 can use any SD card. Just be sure you get an SD card, not an SDHC card. SD cards max out at 2GB, any larger cards are actually SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work.

Inserting the SD card into a card reader, whether it's a laptop slot or a separate card reader with a USB connection, is actually the best way of downloading pictures. You just have to remember to use the "safely remove hardware" function when you remove it or you risk corrupting the card. This may be what happened. Try going into your camera menu with no card in the camera and if you can, find "reset" to return to factory default settings. If not, remove the battery and this time, press all the buttons on the camera, leave it alone for 20 minutes, insert the card and then the battery. Turn it on. If it works, the next step would be to format the card in the camera. This will erase it so make sure you've downloaded all the pics first.Let me know how this works for you.

The best way to delete all information on your memory card on Kodak M1063 is to format the memory card:

Format your SD card. NOTE this will delete all existing data on your SD card.
Do the following:

1. Insert the memory card into the camera. Make sure the card is firmly seated (push in the card until it clicks into place).
2. Turn on the camera.
3. Press the Menu button, then go to the Setup Menu.
4. Scroll up or down to the Format option, then press the OK button

Check the lever on the SD-
Try an alt. card reader.

It sounds like your SD card is faulty.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

All cameras need a memory card of some description. A 1GB SD card would be more than big enough from any photographic shop. Make sure that the lock switch on the side of the SD card is not set.

Take SD card and stick it in computer card reader.
Load card from computer with mouse select transfer click.
Now take loaded SD card and put it in the camera.

Vitally

Hi,
First of all we will have to check the slot size.If the slot is for mmc then you will have to use an adaptor.MMC slot is big in size and sd to MMC converters are available.
Don,t try to insert the card forcefully it may damage the reader's pins.

yes it is 256 Mb maximum