Kenwood chef A901, not working

Possible similar model manual for sale on Ebay, but I cannot be certain that is a service manual for yours.

Operator's manual is online for free, but not a service manual.

https://www.ebay.com.au/itm/KENWOOD-CHEF-A901-A901P-MIXER-REPAIR-KIT-ONE-SPEED-BURNING/183286015575?hash=item2aacb2a657:g:KGUAAOSwqU5Z1Obb:rk:3:pf:0



KENWOOD CHEF A901 A901P MIXER REPAIR KIT ONE SPEED BURNING eBay

Have you tried here? http://www.u-manual.com/download-manual-now-for-free-10/267574/mixer-kenwood-km-201-chef.html

the speed control on my kenwood chef A901 is not working
how do i fix this.

Ring for the customer service number and they will provide you .

Hi there I am trying to get hold of a copy of the service manual for the A701A mixer.
Would someone be able to send me a copy please....
email is [email protected]
thank you to anyone that can help.

My chef A901 started to smell and leak oil. I started to dismantle it but found that a service manual is needed. Kenwood will not supply this for "Health an safety" reasons. can anyone help please.

Could you send me a service manual for an a901 please? Just inherited one from my nan, and serviced it but stupidly cant remember which order the lower bearings go on the motor :/
[email protected]

there is a kit on ebay for both 701 and 901 kenwoods requires use of soldering iron do a search for Kenwood motor repair it is unlikely to be the motor usually the speed contoller components

Hello.

the difference between A701A and A901 is :

high speed outlet
slow speed outlet

planetary hub is similar . A701A, A901 and KM series

A701 Different planetary hub and fit different tools.

is not same A720 and A920 A7 = A701/A
A9 = A901 and KM

In our web site Kenwood Chef Restore in Downloads section.
you can download the compatibility of the models A700, A701 , A900 and KM series .

Regards

It is possible that the drive belt has broken. It is located under the housing on top of the mixer but you need to remove 2 screws under the housing then remove the 3 retaining screws on the drive mechanism. The top of the housing will then lift off and reveal the drive belt. Caution this is not a DIY job for non mechanically minded persons and as always make sure the equipment is disconnected from the power supply. If in doubt seek qualified assistance.