Need the tv coes for my toshiba tv

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Setup codes to check with Toshiba brand TVs are 0529,0917,0472,0118. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

try asking here for free advice + coe

ukbookshelf.co.uk

they are very helpful with these older radios

I HAVE A TOSHIBA 32A33 TV AND JUST UPGRADED MY RECEIVERS AND REMOTES I CANNOT GET THE DIRECT TV UNIVERSAL REMOTE RC64 CODES THAT THEY HAVE PROVIDED TO WORK, ANY ADDITIONAL CODES ? PLEASE HELP

Select your brand and find the tv code for the model.

click HERE

the error code it meens that you have a wrong image file size
try another iso, or download again the file

Here's how:

Turn on the electronic you will programming the code for.
Press and hold the CODE SEARCH button until the red indicator stays on, then release the COE SEARCH button.

Press and RELEASE the desired mode button (TV, VCR, etc.). The red indicator blinks quickly, then stays lit.

Enter the 3 digit code from the code tables.

With the device on, press CHANNEL UP on your remote. If the device responds, no further programming is required.

Panasonic DVD/VCR combo code: 345

Here's how:

Turn on the electronic you will programming the code for.
Press and hold the CODE SEARCH button until the red indicator stays on, then release the COE SEARCH button.

Press and RELEASE the desired mode button (TV, VCR, etc.). The red indicator blinks quickly, then stays lit.

Enter the 3 digit code from the code tables.

With the device on, press CHANNEL UP on your remote. If the device responds, no further programming is required.

(I have the code chart, if you tell me what components you have, ie reply to this post, I will give you the proper codes.)

someone esle found this.. and it worked for me

Program AV1 with 20695, program TV with 10765, then switch to AV1, press select/mute, enter 933, and press select

This will allow volume and mute controls while in DTV mode and allow power on and off while in TV mode. This worked for me on the RC32 remote control.