Burners of electric cooktop not getting red hot

Yes, turn it off and get a gas tech out to check it.

You could have a shorted burner, if it is not then you may have gotten a bad part.

always unplug electricity before attempting to repair on any electrical appliance

You most likely need a new control panel.

Are you sure you got the right burners. Sounds like they gave you a 220 volt burner with one wire red and the other black.

If this is a glass top cooktop then yes the bunner light will still be on when you turn it off. Also the bunner area will be still be hot. The reason why the light is still on it is telling you that the bunner surfas is still over 95 degrees. Once the bunner area is under the 95 degrees the light will go off. It is a safty warning for people saying that the surface is still hot.


Good Luck and please rate 4 thumbs up for the free answer.

I have the same problem. I had a repair man here and he said the main powder logic board ( WB23T10014) was the problem, it would cost $757 to fix. I ordered the board for $230 and installed it myself but still have the F113 problem.

How old is this cook top stove? Does it require replacement?

replace thermastat control

I did not receive instructions with my G E Profile cook top Model No. 80030750434). There is a build up on the elements which I am having problems removing. Should the top be scraped while the stove is hot or cold? What is the best cleaning product to use?

They may stay on until the burners cool off. To indicate a hot surface.