My laptop boot and ask for password . I am unable to boot from any drive(Hard disk,Disk Drive,Flopy Drive, Usb Drive)'
There is no option . what can i do
Hi,
I found a homepage with a load of Backdoor passwords, - one of them will bypass you forgotten BIOS password. If you dont know your type, you´ll have to try them all out, or untill you hit the right one:
http://www.computerhope.com/issues/ch000451.htm
Good Luck
/Teis -> dont forget to vote before you leave :-)
I would NOT attempt to take the laptop apart, in order to find that battery, - I have tried that when I helped someone else, and I (system administrator) had to give in.
On the other hand, if you know what you are doing, it’s the easiest way.
/Teis
It would bee very nice if I could get you to vote this help :-)
/Teis
Hi, back again,
Wondering if you got your problem Fixed,
- if not, let me know,
- if it´s Fixed, then vote “FixYa” to close this case,
Thank you
/Teis
×
Hello,
While hacking the password on the CMOS /BIOS is extremely hard, the best way to fix this issue is to find the CMOS battery which is about the size of a quarter and located under a removable cover. Remove the battery and get into the cmos /bios and set the cmos settings to a bootable state and just try to boot up. Once you are able to bootup remember to re-install the battery while it is booted (It will not harm the pc /laptop in any way to re-install it while powered on!). If you forget to re-install it the worse thing to happen is you will have to re-setup the cmos settings again!
Good Luck!
Rich Lilja
1.Visit the link
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Help-How-to-reset-CMOS-on-3000-N200-model-0769/m-p/57678
2. do as follws.
Hey, forget about battery removal procedure, forget about jumper settings, forget how to crack, forget how to hack, foret how to use backdoor passwords, follow this carefully, this are your options. 0NE go the manufacturer of the motherboard and download a DOS version of the new BIOS for you MOTHERBOARD ( find the correct info and google it, put the serial and version as well)Go to the Main site of the company, TWO go to the manufacturer of the Computer and find the Bios that is up to date and download a DOS version for you COMPUTER, go to the manufacturer main site, put the right info and find the NEWEST BIOS for you system. THREE find help PDF files relates to the SYSTEM or MOTHERBOARD ( use GOOGLE.COM and find the tab for search only PDF files) and follow the procedures carefully, FOUR search PDF files for you SYSTEM FIVE search for PDF files for HOW TO RESET BIOS IN (name of your system). SIX if none of those work Find more info about your system and try to FLASH the BIOS SEVEN if you system is working try to FLASH the Bios throught COMAND PROMPT. EIGHT use WIM'S BIOS page, Google for it. NINE Use WINPLASH software for your BIOS but be carefully to see the info that is specific for your BIOS TEN, if none of this work, Find profesional help, Because you have to have resolved your problem by NOW, or you are desorganizad. ELEVEN, I almost forgot, in the PDF of the manufacturer you have options how to reset password for bios, easy way throught Bios or hard way throught a SPARK GAP JUMPER, it has no pins, onlu two contacts in the MOTHER****** BOARD. TWELVE Im sorry! for my GRAMMAR but I am Spanish speaker. not English, and for being rude. Reddragon 3030. the master hacker
I have know idea as what my administrator password is ????
Try booting from ur internal installes oporating system
27,529 views
Usually answered in minutes!
×