On the Williams 3509612 with the eletronic ignition. The heater pilot light won't stay lit! I have held the pilot light button pushed in for at least 2 minutes sometimes a little longer, but to no avail! What is causing the pilot light not to stay lit after the pilot button is released? The gas is flowing good. No problem getting the initial spark. Just when you release the pilot button the pilot light goes out! Thank you for any response!
I have a Williams top vent gravity wall furnace (model 5009622) and I had the same problem. I had to take the cover off the furnace -- screw on top and two at the bottom (open the access door and there is one screw on each side) to get to the reset button for the vent safety shutoff system. On my furnace it's on the left side toward the top of the unit. I pressed the little red reset button and it's been working ever since. If your furnace is properly installed and doesn't have bird's nest in the chimney, it should work fine. Good luck!
5,316 views
Usually answered in minutes!
I have a brand new Williams monteray 35,000 btu wall heater it is only one month old. The problem started with first the heater stopped working, and the pilot light kept burning, then the pilot light went out and when I tried to relight it, I could not even get the pilot to re-light.
On the Williams 3509612 with the eletronic ignition. The heater pilot light won't stay lit! I have held the pilot light button pushed in for at least 2 minutes sometimes a little longer, but to no avail! What is causing the pilot light not to stay lit after the pilot button is released? The gas is flowing good. No problem getting the initial spark. Just when you release the pilot button the pilot light goes out! Thank you for any response!
Pilot light will not stay lit. It's brand new. The only mistake I made is that I bought the heater 1 year ago, and did not install it until recently. I am afraid I am out of luck as far as returning it or even the warranty.
I hate these heaters with a passion!
I cant get my pilot light to stay lit. I have even called out a pro, he said that it may need a new thermocouple, only that is easier said than done! Having a hard time finding one for this model errrr!
I have this same problem.
I have the Williams 2509622 gas wall heater. The pilot lights, but doesn't stay lit after I depress the pilot button. Why?
Is really windy blowing the pilot out.
pilot lights but goes out when button is released
Followed instructions and pilot light won't stay lit when switched to on
ran out of propane and pilot light went out; need to relight it. the push button spark does not work.
The pilot light won't light
heater and pilot go out after short time
the pilot light will not stay lit. it will light for a while then it goes back out
Why does pilot light stay lit for 5 mins when I've turned my portable gas heater off? Model campinggaz
×