While cooking on cooktop it seems the exaust on microwave is very weak. looks like it is barly working at all. The blower comming out top front blows air good. The exaust being weak allows steam to go up front of microwave getting door damp. It has been like this sinse first installed, exaust was always weak.
This is due to poor air flow, either to a blockage or a problem with the internal cooling fan or hood vent exhaust fan.
Are the grease filters or charcoal filter clogged?
You may want to check your owner's manual for info on checking the filters. Grease filters can be cleaned, but charcoal filters must be replaced about every 6-12 months.
The installation manual will tel you if there's some error in the installation setup.
You can download Maytag
owner's manuals and installation instructions here.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
Since it's brand new, it would be fully under warranty, so I would contact Maytag to have them fix it free.
You can find
your nearest Maytag-authorized servicer here.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
×
510 views
Usually answered in minutes!
×