EnGenius SN 920 Ultra Cordless Phone Logo

Related Topics:

A
Anonymous Posted on Jul 09, 2012
Be the first to answer

Engenius sn-902 i cant register or deregister i cant make calls or recieve calls?

Answer This Question

2 Related Answers

A

Anonymous

  • Posted on Jan 31, 2007

SOURCE: ID Conflict with Base 1 error

hold the volume and intercom buttons together the in use light will come on and then go to menu on handset press 6 then 1 to regester that should work i just talked to a friend with a telecom buisness and he told me what to do with mine good luck

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 04, 2009

SOURCE: cordless phone EnGenius SN 920

. A new handset arrives with a handset ID number of 00, to register this handset to your system take the following steps:

  1. On the EnGenius base unit press and hold down both the "Volume" & "Intercom" buttons for about five seconds. You will hear a beep from the base unit. You can now release the two buttons.
  2. On the EnGenius handset (00), press the following buttons: "menu", "6", "1".
  3. A new handset ID number (ie: 12, 13, 14…) is automatically assigned by the base and registration is complete.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

How do i deregister and re register paperwhite
  1. From your computer: Visit Manage Your Content and Devices. Select Your Devices. Select your device or app and select Deregister in the Actions column. ...
  2. From your device: From Home, tap the Menu icon, and then tap Settings. Tap Registration. In the Deregister Your Kindle dialog box, tap Deregister.
How to Register Your Kindle Paperwhite
Read full answer
May 07, 2016 • Amazon Kindle Fire HD
0helpful
2answers

Can not get the second handset to register to the base
This is the registration procedure

Step 1: press MENU-6 and select 3 “SET BASE”
Step 2: press the REG key on the master base
Step3: press register to finish the registration procedure.
• After the registration complete, handset 11 and handset 21 can
2-WAY intercom with each other

If issue persists reset the unit start registration by using 2nd unit that currently unable to register. if issue continues please inform for further troubleshooting

Good Luck
Read full answer
Jan 01, 2008 • EnGenius SN 920 Ultra Cordless Phone
5helpful
2answers

I need to deregister a DS6101 without the base. I needed to replace the base and once we installed the new base, the extra handset that we had registered with our old base shows the following message...
Called the manufactuer.... To do this enter on the handset you want to deregister:

*331734# and press (Menu Key# 1 - top uppermost left button that is unmarked).


This will put the handset back into the register mode.



Hope this helps,

James Pavicic Jr
Read full answer
Feb 16, 2011 • Vtech DS6101 19 GHz Cordless Phone
2helpful
2answers

I have a Pansonic kx-tga270s that is registered to a base I do not have. Is there a way to deregister it.
you dont need to deregister it if you have not registered all 8 hand sets with your base unit. Just register the new one and the base will assign a new # for this new. I you had registered 8 hand sets with your base already, you need to remove(deregister0 one handset from your base(it can take only upt 8).
If it still not registering please deregister as follows:
on the base unit, press program, them mute, then enter 335#, then enter the handset number you wish to deregister.
after deregistering try to register your new hand set.
Read full answer
Nov 19, 2009 • Panasonic KX TGA270S Cordless Expansion...
0helpful
1answer

Register handset to base unit on sn-920
press menu 6 on handset then press base station reg key for 2 sec till L1 L2 L3 L4 LIGHTS FLASH


handset should now show registration no between 10 and 99
Read full answer
Sep 30, 2008 • EnGenius Lands Phones
0helpful
1answer

EnGenius SN-920 Ultra
Might just be a stuck key or switch. Take a dry cloth and gently rub and press down on the keys like you are wiping it off. Then, if there are any switches on the phone, click them back and forth a few times. Then, take a spray can of air or a small air compressor (100PSI or less), and blow around the edges of the keys/switches. Good luck.
Read full answer
Jan 18, 2018 • EnGenius SN 920 Ultra Cordless Phone
0helpful
1answer

Registering
place on base the will register your handset but make sure battery is charged now to deregister hold # end call button together for 8 seconds follow instructions for deregistering then once done place on handset to register
Read full answer
May 31, 2008 • Uniden Cordless Phone
0helpful
1answer

Cordless phone EnGenius SN 920
. A new handset arrives with a handset ID number of 00, to register this handset to your system take the following steps:
  1. On the EnGenius base unit press and hold down both the "Volume" & "Intercom" buttons for about five seconds. You will hear a beep from the base unit. You can now release the two buttons.
  2. On the EnGenius handset (00), press the following buttons: "menu", "6", "1".
  3. A new handset ID number (ie: 12, 13, 14…) is automatically assigned by the base and registration is complete.
Read full answer
Feb 29, 2008 • EnGenius SN 920 Ultra Cordless Phone
2helpful
3answers

EnGenius DuaFon 1X
Registration:
a. Press MENU-6 to enter the registration mode
b. Press and hold the base’s Registration (REG)
button for 2 seconds until 4 LEDs light up. (Located on the base where you plug in the phone jack)
c. Press handset key “1”, this completes the
registration process. When you register the
handset to BASE 10, the base will assign a
handset ID between 11 and 19. The assigned ID
will be displayed on the handset LCD, indicating
successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID
11 and 12, which gives them administrator
privileges.
Read full answer
Jan 04, 2008 • EnGenius DURAFON1X DuraFon 1X System Phone
0helpful
1answer

ID Conflict with Base 1 error
hold the volume and intercom buttons together the in use light will come on and then go to menu on handset press 6 then 1 to regester that should work i just talked to a friend with a telecom buisness and he told me what to do with mine good luck
Read full answer
Jan 08, 2007 • EnGenius SN 920 Ultra Cordless Phone
Not finding what you are looking for?

View Most Popular

SN 920 Ultra Cordless Phone

  • Lands Phones

Related Question

How do i deregister and re register paperwhite

  • Amazon Kindle Fire HD

62 views

Ask a Question

Usually answered in minutes!

Popular Questions

"no connection" error message when

EnGenius DuraFon 4X Cordless Phone

Can not get the second handset to register to the base

EnGenius SN 920 Ultra Cordless Phone

EnGenius DuaFon 1X

EnGenius DURAFON1X DuraFon 1X System...

Why is my phone on silent ?

EnGenius DURAFON1X DuraFon 1X System...

The phone has a new battery, it is not charging and beeps continually, what do I need to do for it to hold a charge?

EnGenius Lands Phones

Top EnGenius Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an EnGenius Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...