Dvd is locked and lost remote

Depending on the programmable remote you are using they tend to differ a little. For JVC try one of these below:

111, 036, 005, 129, 130, 015, 029 065, 072, 137, 149, 207, 264, 362 408, 496
or
1011, 1012, 1026, 1049, 1052, 1054, 1055, 1080, 1080, 1092
1117, 1130, 1131,
1227, 1235, 1288, 1299

You could also find the original remote to order from a site like www.RemoteControlHookup.com, obviously this option is a little more expensive, than using the comcast remote, but it's easier :-).

Here are the codes that you can try for your jvc tv:

JVC Codes: 013/ 054/ 055/ 060/ 065/ 067/ 089

Hi there, I just had the same problem with my daughter, looked in the manual and it says to hold down the stop button and press the eject button on the unit. That should unlock it, its the same procedure to lock it, in case you want to prevent you daughter from attempting to play biscuits!! 
Regards, darren

I found websites that sell them for a little under $20 by typing in the model number on the front of the remote.

if you reset the radio automatically go to ntsc. reset pressing a little hole reset botton whith a pen tip.

if you do not want to buy another remote control then try to borough one.

Hi,

To my knowledge, due to firmware design, most JVC region locked DVD players can not be unlocked with entry codes through the remote. While some JVC models could be unlock with a firmware update or a PC interface neither of which is available for a TH-P3.

Im sorry but thats just it for this model.

Alternately, a long method is to convert/copy the DVD disc itself from any region to whatever region your JVC is locked into. There are freewares just for this purpose. An example is DVD SHRINK 3.2.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

try to search for the code manually. it should work. good luck

hey, this happened to me too. what you have to do is put it in standby mode, then press and hold the eject and stop button on the actual dvd player, the remote wont work doing this. this is how you can unlock and lock the dvds into the dvd player. why this is a feature jvc thought this needed im not exactly sure, but thats how you fix it.