Dimplex Compact Electric Flame Stove Heater Logo

Related Topics:

Posted on Dec 09, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Dimplex DS5804 remote unit

Blow up while on and pluged in outlet. kicked breaker and now I'll need to replace outlet plus remote unit to be able to use the remote. Any idea what causes these units to do this? Is this been happening to this particular models. Bought this stove in October of 2005. Had been good for our use all this time. Where can I purchase the part so it is useable with the remote. Ernie

Answer This Question
  • Weed49 Jan 30, 2009

    My Dimplex Charmglow model #6906330900 was working fine for several years. Using the remote, I tried to turn the unit on. When it didn't go on, I checked the plug, only to find out that the "power" plug that obviously controls the remote action (that I actually plug the electric stove into) was smoldering. I quickly unplugged the "power plug from the electrical source, and unplugged the electric cord from the stove from the "power unit". My plug is ok, and the electric stove seems to be working ok, albeit without the remote capability. Has there been a recall of this "power" remote plug-in? What is the company doing for this problem? Please advise ASAP [email protected]

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 3 Answers
  • Posted on Sep 02, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 02, 2009
Answers
3
Questions
0
Helped
1776
Points
3

Here is the answer I received for the same problem:

Dimplex has discontinued use of the remotecontrol unit you have requested; therefore we are no longer able to providethis as a replacement part. In order to operate your unit please plugyour power cord directly into your wall outlet and operate the stove via themanual switches.

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Expert 65 Answers
  • Posted on Jan 21, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Jan 05, 2009
Answers
65
Questions
2
Helped
21883
Points
139

Call Dimplex : 1-800-668-6663 ext# 358 They will be gla to help and send parts if needed.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Can you please tell me how to go about getting a replacement remote control for my Dimplex model no 6901050900
Direct from Dimplex

https://www.google.com/search?q=Dimplex+6901050900+replacement+remote


Replacement Parts ' Dimplex

 https://www.dimplex.glendimplexamericas.com > en-ca
Don't lose your cool! Order a new remote, new logs, or any other replacement part you need to extend the life of your Dimplex fireplace or heater with easy to ...
 Missing: 6901050900 ‎' Must include: 6901050900 ..
Read full answer
Aug 28, 2019 • Dimplex Heating & Cooling
0helpful
1answer

Bulb blew in my dimplex michigan fire, model MCN20. I now can't get the bulbs to switch off with either the remote control or the on/off switch.
Stewart, turn the Master ON/OFF Switch to OFF. Unplug the unit from the wall outlet and wait 12 - 15 minutes. Then plug the unit back in and turn the Master ON/OFF Switch to ON and set the function controls manually (not with the remote) one at a time. If everything works as it should, the fire reset itself during the 12 - 15 minute timeout. If it didn't or that problem continues to reoccur, contact Dimplex North America, Technical Service at 888-346-7539.

Hope this helped you solve the problem.
Read full answer
Apr 27, 2011 • Heating & Cooling
1helpful
1answer

My heater motor stoped turning and blowing but the heat strip kept heating and melted the rotating fan . It is a 20406D7F 077 can I order a whole complete replacement unit
Yes, you probably can. Plus, Dimplex should be made aware of this. Contact Dimplex Technical Service 888-346-7539, Monday -Friday, 8a -4:30p ET. Have the model number, serial number and proof of purchase, handy when you call.

Hope this helps you get the parts you need.
Read full answer
Apr 26, 2011 • ACE Dimplex (r) Compact Electric Fireplace...
0helpful
1answer

Hi I have a Dimplex electric fireplace model# CS3311. I had the Remote Receiver plugged into the wall outlet and the Unit Plug was plugged into the side of the Remote Receiver, just like it says to do in...
Lisa, apparently there was an electrical overload in the receiver box. I assume this electric stove is new and still under warranty. In which case, armed with your Proof of Purchase, you need to contact Dimplex USA or the retailer you purchased it from.

Below is a link to Dimplex USA Customer Support.

http://www.dimplex.com/customer_support/contact_us
Read full answer
Feb 23, 2011 • Dimplex Compact Electric Flame Stove...
0helpful
1answer

My dimplex has a remote control box that plugs into the outlet. I haven't used it for a year or more. smelled something hot when it was on. the outlet & box was very hot, the bottom of the box was...
You definitely have an electrical problem either with the remote box or the the A/C unit itself. Something within either of the aforementioned is overheating and use of the air conditioner should be stopped immediately, as it is a fire risk. Unplug everything from the wall outlet and contact a service company that services Dimplex Air Conditioners. This is not a DIY fix!
Read full answer
Feb 07, 2011 • Heating & Cooling
5helpful
2answers

Does dimplex model 6902340100 have a fuse, stopped working no fan, no light took back panel off could not find a visable fuse.
My friend just had the same problem. It turned out to be the Remote Control box,( the little box you plug the Fireplace into so you can use the Remote). He just plugged the Fireplace straight into the wall outlet, (without the Remote) and now it works fine.
Read full answer
Oct 19, 2010 • ACE Dimplex (r) Compact Electric Fireplace...
0helpful
1answer

How much voltage can a standard electrical outlet take? Can a deep freezer be plugged into the same outlet as a microwave?
No a deep Freezer can not be pluged is to the same outlet as a micro. The reason why is if you are using the microwave and the freezer goes on it will pull tomuch power and blow the breaker. You need to have them on seperate lines.
Read full answer
Aug 14, 2010 • Frigidaire Freezers
0helpful
1answer

1700 watt fog machine keep tripping GFC and blowing fog machine fuse
the fog machine needs to be on a dedicated line because of the wattage it does and the amp is rated as a 15 means the circuit breaker on this line needs to be 15 min safe at 20....
the fog machine is like a mircrowave and any major appliance needs dedicated lines not shared with lights or outlets besause it draws a lot of power to start and run and depends how long watts is simular to power the more light bulbs connect to a circuit breaker adds up 4 75w light bulbs adds up to 300 watts and that not includling outlets that may be connected....
not a gfci Unless dedicated at 20a....
Read full answer
Oct 17, 2008 • Kitchen Appliances - Others
0helpful
1answer

Dimplex DS5804 (similar to DS5603) turns on, but no fan to push heat.
A simple way to check the thermostat is to by-pass it. remove the wires from it, and connect them together. If the heat works after that, Its a no brain-er. The thermostat is just an adjustable temperature controlled switch.
Read full answer
Feb 26, 2008 • Dimplex DS5603 Heater
0helpful
1answer

When I turn on dishwasher it kicks breaker at wall outlet.
if it is tripping the breaker you have a dead short to ground check the water inlet valve on the left side front unplug the 2 wire connector to it and plug it in see if it stays on if you you found your short if not let me know.. but i will need the model # off the unit to get the wiring diagram
Read full answer
Jan 21, 2008 • Kenmore 17439 Built-in Dishwasher
Not finding what you are looking for?

View Most Popular

Compact Electric Flame Stove Heater

  • Heating & Cooling

Related Question

Can you please tell me how to go about getting a replacement remote control for my Dimplex model no 6901050900

  • Dimplex Heating & Cooling

Related Topics

630 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to replace fire bulb for Dimplex HTN20

Dimplex DS5598 Mid-Size Heater

Where can a fuer dbg

Dimplex Compact Electric Flame Stove...

How to unlock dimplex wall heater

Dimplex Heating & Cooling

Fire was working fine, then flame effect stopped. Heater still works on both settings, but no flame effect. Tried new bulbs, but still no flame effects, any ideas?

Dimplex Compact Electric Flame Stove...

Early / Late boost in dimplex storage heater

Dimplex DS5603 Heater

Top Dimplex Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Dimplex Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-Compact Electric...

Compact Electric...

Loading...