Installed software and connected Dazzle DVD recorder. No problems. Device recognized. Connected my VCR (JVC HRS6611). Instant DVD recorder reports 'no signal'.
Afterwards connected my DV-camera-output to the Dazzle and everything seems to work.
Do you know a workaround? Is there a list of (not) supported VCR's?
Regards,
Gert
On the start up of the instant DVD recorder program, you can either use the "let the wizard guide you" or "advance mode"
1. Select source:
you should select the options:
Video standard NTSC (Because this is the default in our region)
Video composite - if you are using RCA (red, yellow and white cables)
S-video - if you are using the cable with several pins in it.
2. Select Burner
You should select the options:
Hard disc folder - if you will be saving the content in your hard drive, the format of this files are DVD such as VOB and IFO etc.
TSST - _ _ _ _ - if you will selecting your DVD drive.
(If you have selected your DVD Burner and you cannot click "next" to proceed to the Third option,
this means that your DVD drive is not able to burn a DVD)
3. Select menus
It must be NO
4. Recording
select total recording time (make sure that dazzle is selected in the "select source" to set the total recording time)
1,711 views
Usually answered in minutes!
I have the same problem. Please help.
I have the same problem also!
×