Ringer volume I seem to have misplaced my instrustion manual and the phone rings so unnaturally loud that you can hear it from the end of the street. Does anyone know how to turn the ringer volume down because it's driving me mad.

Two different options,... Call the extension, and while it is ringing, press the volume down bar until you can no longer hear it ringing. You can also try this... Leaving the handset down, do Feature * 80, adjust the loudness for ringer volume by pressing the volume bar.

Adjusting the Ringer, Earpiece and Speaker Volume

Adjusting the Ringer Volume

You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.

With the phone in standby, press or on the handset or VOLUME or VOLUME on the base. The handset or base sounds the ringer at that level.

Use on the handset or VOLUME on the base to make the ringer volume louder. Use on the handset or VOLUME on the base to make it softer or turn it completely off.

When you hear the ringer volume level you want to use, stop pressing keys.

The handset or base will use the new ringer volume starting with the next incoming call.

Note: If you set the ringer volume to Off, the handset or base won't ring. Other handsets or base will ring according

to their individual settings.

Muting the Ringer (One call only)
While the phone is ringing, press /Mute or END on the handset or on the base to mute the ringer

Here some solutions for your problem + a link to the user manual.

**Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
To select the ringer:
1) With the phone in standby, press [vol/ / ] or [vol/ / ].
2) The phone will sound the different ring tones at different volumes. To turn the ringer
off, select RINGER OFF.
3) When the phone sounds the ring tone and volume you wish to use, press [end].


**Temporarily Mute Ringer
If the handset is off the base while an incoming call is ringing, simply press [end] to mute
the incoming ring. The ringer will sound with the next incoming call.
Note: You can only mute the handset ringer if the handset is off the base when the phone starts
ringing.
Adjusting the Earpiece.

**Here is also a link to the phone manual http://www.uniden.com/pdf/EXI4561om.pdf

If the ringout volume is very low, then try not to select a soft, silent or low ringing tone. Try to choose a ringing tone that is loud so that you can hear your phone ringout.
Hope that was helpful?

Adjusting the Ringer Volume (From the Uniden manual)

You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.

1. With the phone in standby, press ArrowUp or Arrow Down on the handset or VOLUME + or VOLUME - on the base. The handset or base sounds the ringer at that level.
2. Use Arrow Up on the handset or VOLUME + on the base to make the ringer volume louder.
   
3. Use Arrow Down on the handset or VOLUME - on the base to make it softer or turn it completely off.
4. When you hear the ringer volume level you want to use, stop pressing keys.
   
5. The handset or base will use the new ringer volume starting with the next incoming call.
6. If you set the ringer volume to Off, the handset or base won’t ring.
   
7. Other handsets or base will ring according to their individual settings.

The Volume key allows you to adjust the volume level for the currently active audio device (handset, headset, or speaker). When no audio devices are active, pressing the Volume key adjusts the ringer volume.

Adjusting the Volume of the Ringer, Handset, Headset or Speaker
Note: By performing this function, default volume level will be replaced.

1. Press the up or down arrow at either end of the Volume key to reach the desired volume level.
   
   
   
2. When you are satisfied with the setting, press the Save softkey.

Note: When adjusting only the ringer volume, there is no need to press Save. The settings are automatically saved upon adjustment.

See the below link for user manual

http://noc.unet.maine.edu/IPT/7961_7941_User_Guide.pdf

You didn't indicate exact model of your phone. However I have indicated the procedure used for common Vtech's 5.8Ghz phones

Ringer volume
• With the handset or base in idle (off) mode, press MENU then
press ▲ or ▼ until RINGER VOLUME is shown
• Press SEL. You will hear a sample of the ringer
• Press ▲,▼ or a digit (0 through 6) You will hear a sample of
the new ringer volume and the volume bar will be increased or
decreased each time the setting is adjusted At the lowest setting
the ringer will be turned off and the display will show:
- OR -
• With the handset or base in idle (off) mode, press or of the
volume control will directly go to ringer volume menu
• Press ▲ or ▼ to adjust the ringer volume

Good Luck

under sound settings

for the folks that are ending their calls by closing it, you can change your settings so that it won't do that. under settings choose how you want to end the call.

with your v3 press <<>> select <<>> select <<>> in <<>> you must choose a ring style exemple:<<>> then goto <<>> and move to <<>> and change 7,6,5,4,3,2,1. Normaly, i put number 3 it's loud enought.