DELL 1720 PICKUP ASSEMBLY replacement - Dell 1720dn Laser Printer

I would recommend searching the brand and model of your laptop. If you need to find the fan, search 'Brand Model # fan' on Google (or your preferred parts site. For example 'Dell Vostro 1720 fan'. If you need the physical replacement instructions, then add 'replacement' or 'disassembly', such as 'Dell Vostro 1720 fan replacement' or 'Dell Vostro 1720 disassembly'. (I used a sample laptop model for these instructions; replace 'Dell Vostro 1720' with your laptop model.)

Sounds like the battery is dying.

Hey, If you have a ADF jam you should replace the pickup assembly (part# D1815-Z3) as well as the separation pad (part# D1815-Z4). Here is a video I made that shows you how. Iteminc.com has these parts and ships same day. Hope it helps!

Make sure you DO NOT plug in your lap top to the power out let. This could cause a shock.
You see the Dell media direct, means your CMOS is OK.
But if Windows is not loading means the spill could have damaged your hard drive. I would strongly suggest you take it to a shop where they repair laptops.
This way you may have to replace your hard drive, but save your note book.

try www.yawcam.com

see if that works better

Boot to the diagnostic partition from the F12 menu, see if the keys work during the diags. If they do, the issue is a software one. If they do not work in the diags, then replace the keyboard.
http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=1720+keyboard&_sacat=See-All-Categories

If you can see the vertical lines during POST, try to check the vertical lines in BIOS. If the vertical lines are there in BIOS, the only thing you can do is to replace your LCD screen.

You can find a junk 1720(dn doesn't matter) and replace the top cover assy. yourself, or you can replace the printer(usually cheaper). Sorry, this is usually terminal for these printers.

The second link was the helpful information. Also, to cut through all of that --

If you need to reset the counter:

1. Remove drum kit with toner

2. Make sure all print jobs are flushed otherwise whatever has been sent and not printed will come spewing out.

3. Hold down CANCEL Button until all lights flash through.

4. Slide the drum kit and toner properly into the Printer.

done.

Open the front cover by pressing the button on the left side of the printer and lowering the cover.
Press the button on the base of the toner cartridge assembly.
Pull the toner cartridge up and out using the handle.
Unpack the new toner cartridge.
****Rotate the cartridge in all directions to distribute the toner****
Install the new toner cartridge by aligning the white rollers on the toner cartridge with the arrows on the tracks of the imaging drum and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed.
Close the front cover.