Nintendo DS Lite Touch Screen Coming Loose

Unless you are comfortable of taking it apart yourself and ordering the part online.
I'd suggest going here.
http://www.nintendo.com/consumer/repair/dslite_repair_home.jsp

yes :O) and it's worth fixing or the top screen cable can be damaged

Go to the retailer you bought it from and if you bought it less than two years ago you can get a new one free with the exchange of the old one only if you have the warranty

get the screen fix man

Hey, I can help you.


Yes, the Bottom LCD is dead. You will have to exchange it.

Below I have two links you should follow through. One to purchase a bottom LCD for a very cheap price and the other will show you how to replace the bottom LCD.


REMEMBER.. To place a plastic pad under the bottom lcd so it doesn't ground out the board. Forgetting to do this could potentially blow a fuse and you will have to replace those!!


1.) http://www.amazon.com/dp/B000RWXCE2?tag=wit08-20&camp=14573&creative=327641&linkCode=as1&creativeASIN=B000RWXCE2&adid=0JJ799NSS5VV0XTY8DYK&

2.) http://www.instructables.com/id/S3ZZJPKFA0CVIFO/

Your bottom lcd is busted. It'll have to be replaced.



Look online for Nintendo DS bottom lcd replacements.. Fairly cheap

the magnatism in screen has been jolted a loose/cheaper to get another.

take it back and exchange it.

contact www.ConsoleRepairsDublin.com

This option is only suitable for out of warranty devices as opening it violates the warranty.

Open the device following this info:
How to dismantle an Original Nintendo DS.

If yours is the NDS Lite, just find this video in youtube:
"Disassembling Nintendo DS Lite"

The bottom screens have 2 wrap wires, one big and visible, that is the screen cable, the other is small and not so obvious and this one is for the touch screen and you dont want to get it broken.

The cable connectors release the cable by lifting ot pulling the brown or black lock and be sure to remember how it was connected so you can know the right position of the cable when connected right not having any problem with loosen cables before you finish.

Good Luck...