REQUIRE A DRIVER FOR MY SCANNER , TINY MODEL FU661E , TO GET IT RUNNING ON MY WINDOWS XP, PLEASE.

There are no windows 7 drivers for that scaner.

after dinging i have found your driver
http://support.visioneer.com/products/4400/downloads.asp
hope that it helped

This may help. Depending on your version of windows 7 you may be able to run Windows XP as a virtual machine and still user your scanner under XP Mode. You will have to install the XP driver for your scanner on the XP virtual machine running on your Windows 7 computer.

Windows 7 has several built-in tools to help with program compatibility and Windows XP programs should be installed directly on Windows 7. Windows XP Mode runs many older Windows XP productivity programs and that are not natively compatible with Windows 7, thus helping realize cost savings and reduce possible operational downtime by extending the life of existing software.

HERE is the direct link to instructions on downloading and using XP Mode on Windows 7

replace the bulb

As you can see,unfortunately,your scanner is not suitable for Vista.I would just go and get a new one.They are not to $$.

From The HP website:
Downloads for this product are not available through this website. Please contact your local HP representative for information on the specific update methods available for this product.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3837264〈=en&cc=us&prodTypeId=15179&prodSeriesId=3837263&taskId=135
Please don't score me low for telling you the truth, even though it may not be the answer you desired.
 

the FU661e will happily uses the 5600 series driver, the FU661 is a rebadging for 'tinycorp', the EU site is easiest to find it on
http://support.visioneer.com/UK/products/home/EOL/5600/downloads.asp

it depends on the model of your scanner, some manufacturers have a subsequent driver for any windows OS platforms, for newer OS like XP and Vista sometimes it is available.

most likely if you will tell me what brand and model we should be able to find an appropiate solution for this

pleas I woant the driver Scan Prisa 640P

try to link this page and download the driver of the printer...then install it on your computer with windows vista...

http://mustek1200vista.googlepages.com/

chaw